Display DT-VMMv2 Руководство по установке - Страница 13
Просмотреть онлайн или скачать pdf Руководство по установке для Внутренняя отделка Display DT-VMMv2. Display DT-VMMv2 20 страниц. Projector vertical mirror mount
Печатать страницу
INSTALLING THE MOUNT PLATE
1]
Using the central top hole on the mount
plate screw the plate to the wall.
2]
Rotate the mount plate to ensure that
it is vertical
3]
Screw a second screw in the middle hole
of the rear row of mount holes
4]
Using suitable fixings (to fix the total
weight of the projector and mount) fix
the mount plate to the wall using both
the top and bottom mounting slots or
larger 10mm bolt holes.
It is the installers responsibility to ensure that the wall/ceiling has the relevant
strength or additional support along with selected fixings to endure that the
combined weight of the projector and mount can be supported. It is recommended
that a total weight of 65kg with a safety factor of x5 is used in all calculations.
Note that the orientation of the mount will depend if you want to have the mirror
mounted up or down. Installation is the same either way just rotate the mount plate
180 degrees.
Installation Manual – Revision 2.0
Fig. 3. Top and bottom mounting slots and bolt holes
13