Acoustic Arc BT1130CUS Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Динамики Acoustic Arc BT1130CUS. Acoustic Arc BT1130CUS 5 страниц.

D. PAIRING

1. Make sure the speaker is On.

2. Enable your Bluetooth device such as cell phones, tablets

or other BT media, and make sure it is in searching mode.

3. Press the Pair/Battery Check button and hold for 5 seconds

until the 4 LEDs ash.

4. Select "BeatsBar" in the list shown in the Bluetooth device.

5. Enter "0000" if password is required.

6. When Bluetooth connection is made, the rst LED will

ash slowly.

7. Listen to your music or make/receive your telephone call

on the speaker.

E. CHARGING

1. Make sure the speaker is fully charge before initial use.

2. Connect speaker with your PC by the supplied USB to Micro

USB cable for charging.

3. Charging is workable to connect with other power adapter

with USB jack at 5V 1A speci cations.

4. The charging LED will illuminate in Red when charging .

Charging is nished when LED turns Green.

F. TELEPHONE CALL

1. If there is an incoming call when streaming music on

the speaker, the music will be muted and ring tone will

be heard.

2. Take your call by pressing the talk button. Press once

again when ending the call. Music will resume again

automatically.

3. To make a call, simply dial your cell phone and talk to

the speaker.

Note: Check the instruction manual for your cell phones,

if getting any process di erent from the above.

G. LINE-IN

1. Connect the speaker to your audio device directly with

the 3.5mm cable provided.

2. The Bluetooth wireless music will be by pass after line-in

connection is made.