Displays2go DP031NVB Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Внутренняя отделка Displays2go DP031NVB. Displays2go DP031NVB 17 страниц. Led counter

Печатать страницу
PC Connection to Single Unit
IP Address
The unit's IP address is live once the unit is powered on.
1. Open Wi-Fi settings on your PC and find the unit IP address. The unit's IP address is "AP" followed by the product ID
number, which can be found on the inside of the unit access door.
2. Enter the default network password: 12345678
Connect to Single Unit via Ethernet
Insert Ethernet cable into Ethernet (RJ45) port of unit, then connect ethernet to PC.
Connection to Single Unit via USB
1. Publish a Solution to USB in ViPlex Express (see page 12 for instructions).
2. Insert USB into USB port of unit. The solution plays automatically.
PC and Phone Connection to Multiple Units
Simultaneous control of multiple units requires an internet router and ethernet (RJ45) cables.
1. Connect all units together via Ethernet (RJ45) cables.
2. Connect ethernet cable to an internet router.
3. Open Wi-Fi settings on your PC or phone, and connect to the router.
PAGE 9