Displays2go HVAWM4290L Инструкции - Страница 3

Просмотреть онлайн или скачать pdf Инструкции для Крепление для телевизора Displays2go HVAWM4290L. Displays2go HVAWM4290L 5 страниц.

Печатать страницу

Step 2 - Assembling the Adaptor Plate (Fig.3)

Insert slider plates (x4) into the adaptor rails, then

insert the adaptor brackets into the adaptor rails.

Attach the adaptor bracket and slider plates with four

M6*12mm screws and four

using a Phillips screw driver.

Attach the adaptor bracket onto the panel using

the provided M5, M6, M8 screws.

NOTE: Determine the correct diameter of screw to use by

checking your panel's user manual, or by testing the

screws provided. Make sure not to force any of the screws

into the panel.

NOTE: If the back of your panel is flat and the mounting

holes are flush with the surface, use the shorter panel

screws. If the back of your panel is curved, protruded, or

recessed, use the longer screws. You may also need to

use spacers with the longer screws.

Now slide the opposite mounting rail into position,

align it with the mounting holes, and secure using the

mounting hardware.

Step 3 - Attaching the flat panel to the

mount

By hand, insert two M8*15mm screws and

metal washers into threaded holes on the adaptor

panel as shown in Fig.4. Leave approximately 3/8"

of exposed thread.

With the help of an assistant, carefully lift the

panel and attach it to the mount head cautiously.

Tighten the screws as shown in Fig.5.

CAUTION: Two people recommended

6mm metal washers

8mm

washer

for lifting

Slider plate

M6*12mm

screw

6mm metal

washers

Adaptor brackets

8mm metal

M8*15mm

screw

Fig. 4

Fig. 3

Adaptor rail

Adaptor bracket

Mounting screws

6mm metal

washers

Fig. 5

washer

M8*15mm

screw

8mm metal