Acoustic Energy Aego BT2 Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Динамики Acoustic Energy Aego BT2. Acoustic Energy Aego BT2 12 страниц. Bluetooth loudspeaker
Печатать страницу
r e a r pa n e l c o n n e c t I o n s
a u x I n
1
As well as connecting to Bluetooth equipped devices, the BT2 can be used with
any device that has a line level audio output such as an older MP3 player, television
or PC. A 3.5mm - 3.5mm jack cable is supplied with the BT2 for this purpose but any
analogue stereo connection can be used to supply a signal to the BT2 provided
that you have a cable that terminates in a 3.5mm connection.
Aux is selected by the BT2 automatically when the 3.5mm connector is inserted; the
lower status light will switch from blue to green to indicate the aux input is active.
To manually switch back to Bluetooth simply press and release the Bluetooth button
or disconnect the aux lead. To switch back to aux press and release the power button.
r e s e t
2
The reset button will return your BT2 to the condition it was in when it was first
unpacked from the box. All previous paired devices will be forgotten as will any
pairing with another BT2 speaker for stereo playback. The reset button has been
deliberately recessed to avoid accidental depression. An object like an unbent
paperclip will be able to reach the button and once pressed for a few seconds,
the BT2 will reset. Bluetooth connections can be fully reset by depressing the
Bluetooth button for four seconds until there is an audible beep.
c h a r g e o u t
3
This is a USB-A connection that will provide a charge for a phone or tablet connected
to it. The charge out will work with the BT2 running from mains and running from
battery power if the charge level on the BT2 is over 20%. Once charge dips below this
level, the output will be disabled to keep the BT2 running for as long as possible.