CAME 319U36EN Руководство по установке - Страница 4
Просмотреть онлайн или скачать pdf Руководство по установке для Панель управления CAME 319U36EN. CAME 319U36EN 19 страниц. Control panel for 24v gearmotors
4.2 Main components
1.
Transformers
2.
Speed adjuster connectors
3.
Terminal board for connecting the
002LB18 card (if unused, make sure that
bridges are connected among A-B; C-D;
E-F; G-h)
4.
Accessories fuse
5.
Card fuse
6.
Amperometric sensitivity during travel
adjustment trimmer
7.
Amperometric sensitity during travel
adjustment trimmer
8.
Amperometric sensitivity during
slowdown adjustment trimmer
9.
Opening / closing strike zone adjustment
trimmer
10.
Automatic closing adjustmet trimmer
11.
10-Dip switch selector function
12.
LED to signal radio code/ ACT counter
13.
Code memorising buttons
14.
Selection jumper B1-B2 / cycle lamp
15.
Radio frequency card socket
16.
Line fuse
17.
Connection terminals
18.
4-Dip switch function selector
19.
Selection jumper for command type for
button on 2-7
20.
Electro block fuse
21.
M1 motor fuse
22.
M2 motor fuse
5 Installation
Installation must be carried by skilled, qualified technicians in accordance with current regualtions.
5. 1 Preliminary checks
Before beginning to install, the following is necessary:
• Check that the fastening point of the control panel is protected from accidental impacts, and that the surfaces used for fastening are
solid, and that the fastening is done with proper screws and plugs.
• Set up a suitable omnipolar cut-off device, with distances greater than 3 mm between contacts, with sectioned power source
•
Check that any connections inside the container (made for continuity purposes of the protective circuit) are fi tted with extra
insulation compared to other internal conductive parts.
• Set up proper conduits and electric cable raceways, making sure these are protected from any mechanical damage.
3
22
21
19
11
16
12
Warning! Before acting on the eqipment, cut off the main power supply and
disconnect the emergency batteries (if present).
2
4
20
1
6
7
9
10
13
14
17
5
8
18
15