CAME A 5024 N Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Открыватель двери гаража CAME A 5024 N. CAME A 5024 N 13 страниц. Ati series
Также для CAME A 5024 N: Руководство по установке (13 страниц)

Печатать страницу

Securing and adjusting the endstop

Stop brake microswitch

OPENING PHASE: (stop)

Release the gearmotor and swing the gate-leaf to the fully open

position you desire, then, unscrew the securing screws on the opening

stop micro-switches assembly.

Slide the micro-switch assembly along the micro-switch bar until it is

inserted by contact on the micro-switch activating sled

Secure the micro-switch assembly using the respective screws.

Part. A.

Release the gearmotor and swing the gate-leaf to the fully open position you desire, then, unscrew the securing screws on the opening stop

micro-switches assembly.

Slide the micro-switch assembly along the micro-switch bar until it is completely passing the contact point on the micro-switch activating sled (as

shown in part B.).

Secure the micro-switch assembly using the respective screws.

Part. B.

Microswitch bar

Cable support

Micro-switch

insertion area

OPENING PHASE (deceleration if set up on the control panel):

Closing-speed brake microswitch

Spindle

CLOSING PHASE (deceleration)

Swing the gate until fully closed.

Unscrew the securing screws on the closing decelaration micro-switch

assembly.

Slide the micro-switch assembly along the micro-switch bar until it is

completely passing the contact point on the micro-switch activating sled

(as shown in part A.)

Secure the micro-switch assembly using the respective screws.

Excluding the micro-switch contact (fully

open gate-leaf)

Endless screw

Microswitch actuating sled

Excluding the micro-

switch contact (fully

closed gate-leaf)

Deceleration micro-switch

insertion area