CAME AX5024 Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Открыватель двери гаража CAME AX5024. CAME AX5024 16 страниц. Operator for swing gates
Также для CAME AX5024: Руководство по установке (16 страниц)

Печатать страницу

1. Installation

Standard installation

AXO operator

Control panel

Reception antenna

Flashing light

Selector switch

Photocells

Electric cable junction box

Mechanical gate stops

Photocell column

GENERAL INSTALLATION INDICATIONS

Only skilled, qualified staff must install this product.

Preliminary checks

Before beginning, do the following:

• check that the gate structure is sturdy enough, the hinges work efficiently and that there is no friction between the fixed and moving parts;

• make sure that measurement C does not exceed the value shown in the reference table;• make sure you have fitted opening and closing

mechanical gate stops;

• make sure that the point where the gearmotor is fastened is protected from any impacts and that the anchoring surface is solid enough;

• make sure you have set up a suitable dual pole cut off device along the power supply that is compliant with the installation rules. It should

completely cut off the power supply according to category III surcharge conditions (that is, with minimum contact openings of 3 mm);

•

make sure that any connections inside the container (ones that ensure continuity to the protection circuit) are fitted with additional insulation

with respect to those of other electrical parts inside:

•set up suitable tubes and conduits for the electric cables to pass through, making sure they are protected from any mechanical damage.

Tools and materials

Make sure you have all the tools and materials you will need for installing in total safety and in compliance with applicable regulations. The figure

shows some of the equipment installers will need.