3DGence DOUBLE P255 Руководство по техническому обслуживанию - Страница 8

Просмотреть онлайн или скачать pdf Руководство по техническому обслуживанию для 3D-принтеры 3DGence DOUBLE P255. 3DGence DOUBLE P255 19 страниц.

The result of such action will be the basis for further operations:

1. Go to MENU → ADVANCED → XY CALIB. (fig. 25).

2. Choose ORIGIN X and use –/+ keys to enter the value of the dimension given to the model in X axis. In the

case of Dimmension_Calibration.stl file downloaded from the website, this value is 100,00 mm.

3. Choose PRINT X and use –/+ keys to enter the value measured on the cross in X axis.

4. Choose ORIGIN Y and use –/+ keys to enter the value of the dimension given to the model in Y axis. In the

case of Dimmension_Calibration.stl file downloaded from the website, this value is 100,00 mm.

5. Choose PRINT Y and use –/+ keys to enter the value measured on the cross in Y axis.

6. Confirm the changes with the Save key. Additionally, in order to verify correct axis calibration, you can print

the Dimmension_Calibration.stl model downloaded from the website once again and measure it. Thanks to

this procedure, the next printout of the material for which calibration was performed will be printed with

compensation of material shrinkage along X and Y axes.

3DGence DOUBLE P255 - maintenance activities | version 07.2021

Fig. 60 Table of measurements for X axis and Y axis