Acoustic Magic Voice Tracker 2 II Краткое руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Микрофон Acoustic Magic Voice Tracker 2 II. Acoustic Magic Voice Tracker 2 II 4 страницы. Array microphone
Печатать страницу
The Voice Tracker II scanning listening beam can pick
up sound from a full 360° field of view. However, the
Voice Tracker II is more sensitive to sound in front than
from behind.
For use with a PC (speech recognition or VoIP
telephony/conferencing) the Voice Tracker II can be
placed under or next to the display.
In a conferencing application, it is best to place the Voice
Tracker II on one end of the table with its front pointing
towards the far end.
Voice Tracker II can also be mounted (with an optional
bracket) on walls or on the ceiling to reduce clutter.
To maximize acoustic echo cancellation, use only one
loud speaker, and place it to one side of the Voice
Tracker II.
Talker location signal
Since the Voice Tracker automatically points a "listening
beam" at the loudest talker, it knows the location. This
signal is made available as a digital word through the
DB9 connector (cable is optional).
The RS 232 serial output signal consists of 8 bit words,
no parity, 1 stop bit; commonly referred to as 8,N,1.
2400 baud.
Data is between 0 and 250, corresponding to talkers
from the far left in front of the Voice Tracker (0) to the far
right (250). If the talker is directly in front of the Voice
Tracker, the data will read 125.
Note that the Voice Tracker picks up sound from the
behind. So a reading of 125 could mean the talker is
directly in front or directly behind the Voice Tracker.
When the Voice Tracker detects no talker, the location
signal reads 255.
The user will have to create application SW to calibrate
these signals into degrees.
Applications
Speech Recognition
TM
Since the Voice Tracker
types of microphones or audio input devices, you should
retrain your speech recognition software (enroll a new
user). Be sure to select USB Array Microphone during
the "New User" setup. Personalized vocabulary can
usually be transferred to the retrained "User".
Conferencing
The Voice Tracker II can be connected to non-PC-based
conferencing systems. Some of the systems require an
XLR (balanced) connection. An inexpensive adapter (like
the Radio Shack 274-017C Adapter/Transformer) can be
operates differently from other
www.icons.net.in
used to convert the Voice Tracker II's unbalanced low
impedance output to "balanced" XLR.
Meeting Recording
The Voice Tracker II can be connected to a PC with
meeting recording SW, or directly to a handheld digital
recorder using the 3.5 mm analog audio output jack and
wall power supply.
Security Monitoring
The Voice Tracker II can often connect directly to the
microphone input jack of video cameras/dial-up/Internet
transmission systems. Choose the analog output level
that matches the camera requirements.
Trouble Shooting:
Acoustic echo cancellation.
If the ref signal is too strong or too weak, AEC will not
work well. Make sure the playback level in the PC is set
to midscale. Turn up the volume on the (external)
speaker itself if more loudness is desired.
No Audio
Check whether the LEDs track the talker. If not, reboot
(repower). If so, the problem is probably in the computer
setup. Make sure it is looking for recording input where
the Voice Tracker is connected (USB, Mic in, or Line in).
Analog or USB Audio too strong.
Make sure the output level switch is set to mic level
Analog or USB Audio too weak.
Make sure the output switch is set to line level
FCC Compliance
This equipment has been tested and found to comply the
limits for a Class A digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against interference when the
equipment is operated in a commercial environment.
This unit generates, uses and can radiate radio
frequency energy, and if not installed and used in
accordance with the instruction manual, may cause
harmful
interference
with
Changes or modifications not expressly approved by
Acoustic Magic could void the user's authority to operate
the equipment.
35 Peakham Road
Sudbury, MA 01776
www.ACOUSTICMAGIC.com
radio
communications.