Aeris F10 Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Смотреть Aeris F10. Aeris F10 2 страницы.
Печатать страницу
SET MODES:
Refer to the Operating Manual for detailed instructions.
• Watch Mode - can set Time/Date, Alternate Time, CD Timer, Chronograph start/stop, Daily Alarm
• FREE Set Mode - press both Lower/Left and Upper/Right to access Set Groups (A - Alarms, U - Utilities, Serial No.)
• Set A (Alarms) - can set Audible, SRT, EDT, RDI, DD 1, 2, 3
• Set U (Utilities) - can set Wet Activation, Units, Backlight Duration, BDSI
• Change Settings - access Set group, press Lower/Left to step through items, press Upper/Right to increase Set Points or
Upper/Left to decrease them, then press Lower/Left to save them
press Lower/Left 2 sec
LOG
To access History 1,
press Lower/Left 2 sec
HISTORY
DIVE MAIN
Altitude Diving:
• Samples ambient pressure every 15 minutes while in Free Surface Mode prior to Dive #1 and for 24 hours after a dive.
• Automatic adjustment when manually activated from 3,000 to 14,000 feet (915 to 4,270 meters).
• Above 3,000 feet (915 meters), the unit recalibrates to adjust Depth readings every 1,000 feet (305 meters)
• DO NOT use at a different Altitude until the unit automatically adjusts to the new altitude.
Low Battery Condition:
• Replace with a 3 volt, CR2430, Lithium battery.
• If the battery is replaced within 8 seconds, settings are retained.
©2002 Design, 2009
To access Log 1,
from SURF MAIN,
SURF MAIN
To access ALT 1,
press Lower/Left
< 2 sec
SURFACE MODE
To access ALT 1,
press Lower/Left
< 2 sec
To access Chrono,
press Upper/Left
< 2 sec
CHRONO
DIVE MODE
To access ALT 2,
press Lower/Left
< 2 sec
DIVE ALT 1
ALTs,
revert to
MAIN after
5 sec
SURF ALT 1
To access ALT 2,
press Lower/Left
< 2 sec
SURF ALT 2
ALTs,
revert to
MAIN after
5 sec
DIVE ALT 2
Doc. No. 12-7244-r01 (3/25/09)