Acoustic Remedy ClimaCab Установка и использование - Страница 7
Просмотреть онлайн или скачать pdf Установка и использование для Музыкальное оборудование Acoustic Remedy ClimaCab. Acoustic Remedy ClimaCab 10 страниц.
Печатать страницуA C O U S T I C R E M E D Y
C L I M A C A B
S E T
U P
A N D
U S E
SET UP AND USE DIRECTIONS
12.) Insert the wood slotted cover plate over the opening in the floor of the ClimaCab. If your
ClimaCab has the Bout/Neck Rest System, place the cork lined bout rests into place by locating the
small notch on the bottom side and placing that over the permanently affixed rails on the floor of the
ClimaCab.
13.) Set the target relative humidity by accessing the RH set point from the menu. Please reference
the Vigilant Owner's Manual document provided by Acoustic Remedy for further instructions on using
the humidifier. This can be accessed by scanning the QR code in this document and on our website
under Support tab from the main menu.
14.) Place the Boveda 2-Way Humidification packets into the pre-mounted cedar packet holders.
These are mounted along the center bar on the Petite+ and larger ClimaCabs. For the Petite size, use
the included magnet and/or velcro pads and install the mounting hardware by using the included
instructions from Boveda. Additionally, a common location to store the packet holders is along the
floor where the back and floor intersect.
15.) Begin placing your guitars into the hangers in any configuration you desire. All String Swing
hangers used in the Top Rail Storage/Display Option can pivot 180 degrees at the yoke. Certain slat
wall hangers pivot at the yoke and near the powder coated plate while others are straight fixed arms
of various lengths. The pivoting allows for multiple storage configurations. For the Neck/Bout Rest
Storage/Display Option, space the bout rails at appropriate distance apart for your guitar bout size.
For electrics, they will need to be closer together and for larger bodied acoustics farther apart. Also,
the further from the Neck Wedges, the more angled they will be to come into the holder and may
create issues with the strap pin on the bottom of the guitar. It's best to keep them close to the back of
the ClimaCab as possible. Align the neck holder with the neck of the guitar once it's placed in the bout
rails.
16.) On the two door models, the gasket will be compressed by magnets on the back side of the door
and opposite poled on the center bar. On the one door models, latches opposite of hinge side will
accomplish this important task
17.) We recommend keeping the doors shut at all times when not adding/removing guitars or
performing cleaning, maintenance to the humidifier and other necessary tasks to keep your ClimaCab
operating at optimal levels.