Acoustic Remedy RECTANGLE Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальное оборудование Acoustic Remedy RECTANGLE. Acoustic Remedy RECTANGLE 8 страниц.
Печатать страницуC L I M A C A S E
How to Use Upgrade/Options:
Powered LED Light Strip
Locate the white cord terminating through the right back corner of the bottom of the humidor portion of
the ClimaStand. Upon preparing for shipment, the white cord will be taped to the bottom outside of the
humidor. This white cord is the end of the remote control sensor and has a circular barrel connector on
the end of it. Carefully remove the tape and free the cord.
Locate the black power adapter in the accessories box. Insert the male barrel connector into the female
barrel connector on the end of the remote control sensor wire.
Plug the power adapter into a 110V outlet and the light strip should power on.
Use the included remote to control the light level, turn the light on/off, and pair the remote/sensor again
(if necessary).
Although the remote and remote sensor should be pre-paired, you may need to pair again. To do so
simply unplug the power adapter, plug in and hold the 100% and 60% simultaneously for 5 seconds. The
re-pairing process should be complete.
Keyed Cam Lock
To operate the keyed cam lock, use the provided key and turn counter clockwise to lock the case.
Reverse the process to unlock.
The lock operates by swinging an arm, or "cam", into a receiving plate on the backside of the door frame.
There should be very little resistance when locking/unlocking. If there is excessive resistance, please
contact us to determine reasons and solutions to this..
UV Blocking/Safety Glass
The glass is professionally installed and can be used immediately
We recommend using the Spotless Cleaner to clean the glass. It doubles as a wood cleaner as well
Storage Compartment
The storage compartment for a ClimaCase mounts to the underside of the humidor using matte black
bolts.
Line the compartment holes with the brass inserts and push the bolt through the hole, thread the bolt into
the insert and hand tighten each. Finish the installation with the included allen wrench.
Neck/Bout Rest Storage System
If you elected to rest your instrument instead of hanging it from the String Swing, the components of the
Neck/Bout Rest Storage System function using high strength neodymium magnets
On the floor of the ClimaStand, there will be powder coated black bars that attract the magnets on the
underside of the bout rails. The rails are adjustable left to right to accommodate a variety of lower bout
sizes
The neck rest will have two locations at the top of the ClimaStand that allow for different length
instruments. The goal is to have the neck entering the neck wedge around the 3rd-5th fret.
Once the proper bout rail width and neck rest locations have been determined, place your instrument into
the ClimaStand and allow the back of the instrument to rest on the cork bumper pad.
Finish by placing the small black powder coated bar onto the magnets on the neck rest
A C O U S T I C R E M E D Y
O W N E R ' S
|
T R I A N G L E
M A N U A L