Acoustic Research ARSWP1 Руководство по установке и эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Динамики Acoustic Research ARSWP1. Acoustic Research ARSWP1 2 страницы. Bluetooth wallplate speaker
Печатать страницу
Troubleshooting
The following troubleshooting guide takes you through some of the more common
problems associated with the installation and/or operation of a wireless system. If the
problem persists, please call toll-free at 1-800-732-6866 or visit
www.acoustic-research.com.
Issue:
Cause and solution:
No sound
• Check that the speaker is fully inserted into the wall outlet
• Confi rm that the Pairing light is on to indicate a successful connection.
• Check that the audio source component (stereo, MP3 player, etc.) is turned
on and transmitting sound as it normally should.
• Make sure the volume on your audio source is turned up.
• Move the Bluetooth device and the speaker closer together. The Bluetooth
wireless technology generally can operate within a range of 35 feet.
However results may vary based on other factors such as room layout, wall
material, weather conditions, etc.
• Make sure you have switched to your phone's Bluetooth connection when
streaming audio with Bluetooth.
• Make sure you entered the correct passkey when pairing your device.
Cannot pair
• Make sure the Bluetooth capability of your device is turned on and
the speaker
discoverable.
with your
• Move the Bluetooth device and the speaker closer together. The Bluetooth
Bluetooth
wireless technology generally can operate within a range of 35 feet.
device
However results may vary based on other factors such as room layout, wall
material, weather conditions, etc.
• Make sure your device supports Bluetooth audio transfer.
• Turn off all other nearby Bluetooth devices or disbale their Bluetooth
functionality.
Specifi cations
Speaker
• Bluetooth® wireless technology: Bluetooth v4.0 + A2DP profi le
• Operation distance : Up to 35 feet (open area)*
• Frequency response: 20Hz - 20kHz
• Operates using power supply: 120 V ~ 60 Hz
*Maximum range; results may vary according to environment.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Regulations state that unauthorized changes or modifi cations to this equipment may void the user's
authority to operate it.
RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
Industry Canada Regulatory Information
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two
conditions: 1) this device may not cause interference and 2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d'Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by VOXX Accessories Corporation is under license. Other trademarks and trade names are those of
their respective owners.
12 Month Limited Warranty
VOXX Accessories Corporation (the "Company") warrants to the original retail purchaser of this
product that should this product or any part thereof, under normal use and conditions, be proven
defective in material or workmanship within 12 months from the date of original purchase, such
defect(s) will be repaired or replaced (at the Company's option) without charge for parts and repair
labor. To obtain repair or replacement within the terms of this Warranty, the product along with any
accessories included in the original packaging is to be delivered with proof of warranty coverage (e.g.
dated bill of sale), specifi cation of defect(s), transportation prepaid, to the Company at the address
shown below. Do not return this product to the Retailer.
This Warranty is not transferable and does not cover product purchased, serviced or used outside the
United States or Canada. The warranty does not extend to the elimination of externally generated
static or noise, to costs incurred for the installation, removal or reinstallation of the product.
The warranty does not apply to any product or part thereof which, in the opinion of the company, has
suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect,
accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter
not provided with the product, or by leaving non-rechargeable batteries in the product while plugged
into an AC outlet.
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED
THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF
ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN
A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No
person or representative is authorized to assume for the Company any liability other than expressed
herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damage so the above limitations or exclusions may not
apply to you. This Warranty gives you specifi c legal rights and you may also have other rights which
vary from state/province to state/province.
U.S.A.:Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit #3 Door 14, Mississauga
Ontario L5T 3A5
Trademark(s) ® Registered
www.acoustic-research.com
MADE IN CHINA
v1.0 (1.0.1.0)