Acoustic Research AW851 Руководство по установке и эксплуатации
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Динамики Acoustic Research AW851. Acoustic Research AW851 2 страницы. Outdoor lantern and wireless speaker
Печатать страницу
Outdoor Lantern and
Wireless Speaker
Model AW851
Installation and
Operation Manual
Important Information
CAUTION
Caution:
To reduce the risk of electric shock, do not remove cover (or back). No user
RISK OF ELECTRIC SHOCK.
serviceable parts inside. Refer servicing to qualifi ed service personnel.
DO NOT OPEN.
The Lightning fl ash with arrowhead symbol, with
The exclamation point within an equilateral
an equilateral triangle is intended to alert the user
triangle is intended to alert the user of the
of the presence of uninsulated dangerous voltage
presence of important operating and maintenance
within the product's enclosure that may be of suffi cient
(servicing) instructions in the literature accompanying the
magnitude to constitute a risk of electric shock to persons.
appliance.
For power rating and all applicable warning labels, see the bottom and the side of the transmitter and receiver/speaker.
Important Safety Instructions
8. Protect the power cord from being walked on or pinched
particularly at plugs, con ve nience re cep ta cles, and the
1. Read these instructions.
point where they exit from the apparatus.
2. Keep these instructions.
9. Unplug this apparatus during lightning storms or when
3. Heed all warnings.
unused for long periods of time.
4. Follow all instructions.
10. Refer all servicing to qualifi ed service personnel. Servicing
5. Clean only with dry cloth.
is required when the apparatus has been dam aged in any
6. Do not block any ventilation openings. Install in
way, such as power-supply cord or plug is damaged, liquid
accordance with the manufacturer's instructions.
has been spilled or objects have fallen into the apparatus,
7. Do not install near any heat sources such as radiators,
the ap pa ra tus has been exposed to rain or moisture, does
heat registers, stoves, or other apparatus (including
not op er ate normally, or has been dropped.
amplifi ers) that produce heat.
11. Only use attachments/accessories specifi ed by the
manufacturer.
Care and Maintenance
• Always use a soft cloth to clean the speaker and
Product Information
transmitter. Never use any product containing alcohol or
other solvents as they may damage the surface.
Keep your sales receipt to obtain warranty parts and
• Use caution when plugging the power transformer in an
service and for proof of purchase. Attach it here and
AC outlet to avoid the risk of electric shock.
record the serial and model numbers in case you need
• To clean the lantern/speaker: Shut off main power supply.
Wipe with damp cloth or use window cleaner. Do not use
them. These num bers are located on the product.
abrasive cleaners.
Model No.: ______________________________________
• Bulb replacement: Replace with MAX 40W type B or
Purchase Date: __________________________________
Listed 13W Self-Ballasted Compact Fluorescent Lamp
(candelabra-based bulb).
Dealer/Address/Phone: ___________________________
Warning: Do not use bulb-base adapters with this product.
This product must be used with candelabra-based bulbs only.
WARNING: RISK OF INJURY
• Some metal parts in the fi xture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
• Account for small parts and destroy packing material, as these may be hazardous to children.
• Use fl ashlight or alternate light source to light work area during installation.
• Assistance may be required to support fi xture during installation.
• This apparatus must be installed in accordance with all applicable installation rules.
• This device must be connected to a mains socket outlet or outlet box with a grounded and protected connection.
• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
CAUTION: WIRING AND FIXTURE OPERATION
• Connect fi xture to supply wires rated for at least 90°C (194°F).
• Do not use fi xture on dimming circuits.
• Unit must be mounted higher than 60".
WARNING
To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
Recommended
Installation Location
Install your outdoor lantern and
wireless speaker under eaves that
3ft 11in
extend at least 1 meter (3ft 11in)
(1 meter)
from your house and are at least
3 meters (9ft 10in) off the ground.
2ft 6in
(.75 meter)
Then make sure the bottom of the
outdoor lantern and wireless speaker
is at least 1.8 meters (5ft 6in) off the
ground.
The outdoor lantern and wireless
speaker must be mounted to a wall
made of wood or concrete.
Introduction
AR's Outdoor Lantern and Wireless Speaker System puts a new twist on your outdoor
lighting: sound! The AW851 eliminates the hardest part of adding speakers to your
home—running and hiding hundreds of feet of speaker wire. The AR Wireless Speaker
System's RF signal travels with ease through walls, fl oors, ceilings and other obstacles,
delivering high-quality sound and stylish décor. With drift- and static-free reception
along with outstanding range—up to 150 feet*—the possibilities for enjoying your AR
Wireless Speaker System are nearly unlimited. The AR Wireless Speaker System is
compatible with most audio sources, such as TVs, DVD players, VCRs, A/V receivers/
amps, stereos, computers, and portable devices (CD players, cassette players, MP3s
etc.).
This manual covers various connection options and detailed operating instructions for
making the AR Wireless Speaker System a valued part of your lifestyle. If, after having
reviewed the instructions, you have any questions, please call toll-free
1-800-732-6866 or visit www.araccessories.com.
*Range may vary according to environment.
Setting Up
Unpacking
Before you start installing the Outdoor Lantern and Wireless Speaker, make sure you
have the following parts in your package:
(2) Wire
Connectors
(2) Mounting
Screws
(2) Caps
(1) Mounting Crossbar
(1) mini-jack to
RCA adapter
(1) Lantern/Wireless Speaker
Mounting the Lantern/Wireless Speaker
Before you can use the Outdoor Lantern and Wireless Speaker, you must mount it to
an outlet box.
WARNING: Consult a qualifi ed electrician in case the main supply wiring needs to be
checked or if you're not certain how to install wiring. Always install wiring connections
in accordance with local code, ordinances, and the National Electrical Code.
1. Make sure power is off for the outlet box at the main
circuit breaker.
2. Remove the old fi xture from the outlet box. Carefully
disconnect its wiring.
3. Mount the crossbar to the outlet box using the mounting
Level
screws included in this package.
4. Unscrew the center screw on the crossbar and align the
two side screws so that they are level with each other. Then
tighten the center screw.
5. Find the copper ground wire coming from the wireless
speaker. Twist it together with the ground wire coming from
the outlet box.
If the outlet box doesn't have a ground wire, attach the
ground wire to the mounting crossbar as shown here.
Ground
6. Strip 3/4" of insulation from the wire ends coming from
wire
the speaker. Use pliers to twist the speaker's stripped ends
together with the wires coming from the outlet box—make
sure you match black wire to black and white wire to white.
Then snip the ends.
7. Attach the wire connectors to the joined ends. If you'd like,
you can tie the connectors and ends together with electrical
tape.
8. Place the wireless speaker onto the two side screws on the
crossbar. Secure the speaker onto the wall with the two caps
included in this package.
9. Use silicon caulking to seal the top and sides between
the speaker and the wall. Leave the bottom open so that
moisture can drain.
Connecting the Transmitter to an Audio Source
Y-adapter
audio cable
CHANNEL
DC IN
A
1 2 3
R AUDIO L
IN
Transmitter
Audio
(back panel)
source
Warning: This product is designed to work with line level outputs or headphone
outputs only. DO NOT connect it directly to speaker outputs as it will permanently
damage the transmitter.
Transmitter (back panel)
120V AC
wall outlet
AC Power
Adapter
CHANNEL
DC IN
1 2 3
R AUDIO L
IN
Note: This power unit is intended to be correctly oriented in a vertical or fl oor
mount position.
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be
left plugged in and powered at all times. If you will not be using the AW851 for an
extended period of time, unplug the transmitter AC power adapter.
Connecting to an A/V Receiver
You can also connect the transmitter to an A/V Receiver using the mini-jack to
(1) Transmitter
RCA adapter included.
1. Plug the stereo plugs on the provided Y-adapter audio cable into the AUDIO
IN jacks on the back of the transmitter (make sure to match the colors on the
plugs and jacks).
Transmitter
(back panel)
A/V Receiver
(1) Transmitter
Power Adapter
CHANNEL
DC IN
A
Audio Output
1 2 3
R AUDIO L
IN
Y-adapter
Mini-jack to
audio cable
RCA adapter
(1) 3.5mm to
RCA Cable
Installing/Changing the Lantern Light Bulb
The Outdoor Lantern and Wireless Speaker takes a candelabra-base bulb (40W max;
bulb not included). The bottom of this Outdoor Lantern and Wireless Speaker is open
for easy access to the socket. For best results, use a clear (non-frosted) 40W bulb. To
install or change the lantern's bulb:
Bottom of the Lantern
Light socket
Tour of the Speaker System
Lantern/Speaker
Right Panel Speaker Controls
Speaker
On/Off
Speaker On/Off button turns the speaker on and off
Auto Scan button rescans for the transmitter's signal
Auto Scan
Volume Up and Down buttons adjust the volume level
Volume
L/Mono/R switch determines if the speaker plays sound in mono
as a stand-alone speaker, or plays the left or right track in a
Volume
stereo pair with an additional AW851
Light On/Off switch turns the lantern on and off
L Mono R
Front Panel
Power/Linked indicator (not shown) blinks when the speaker is
Light
On/Off
fi rst powered on; it turns solid blue when the speaker is tuned to
the transmitter
Right Side, Back
1. Plug the stereo plugs on the provided Y-adapter
audio cable into the AUDIO IN jacks on the back of
the transmitter (make sure to match the colors on
the plugs and jacks).
2. Plug the mini-plug end of the provided Y-adapter
into the headphone output of your MP3 player or CD
player (or audio output jack on your computer).
3. Connect the small, round plug from the transmitter
AC power adapter to the transmitter's DC IN jack.
Plug the other end of the transmitter AC power
adapter into any standard 120V AC wall outlet.
2. Plug the mini-plug end of the provided
Y-adapter into the mini-jack to RCA adapter.
3. Connect the stereo plugs on the mini-jack to
RCA adapter to the corresponding left and
right audio outputs of your A/V receiver,
amp, or other audio source.
1. Find the light socket located on the bottom of
the lantern.
2. Insert the bulb and screw it into the socket.
Important: Handle and dispose of fl uorescent
bulbs per manufacturer's directions.