3DHobbyShop.com Yak 54 Руководство по сборке - Страница 11

Просмотреть онлайн или скачать pdf Руководство по сборке для Игрушка 3DHobbyShop.com Yak 54. 3DHobbyShop.com Yak 54 18 страниц. 55” arf rc aircraft

Install the rudder pull-pull cables onto the rudder horn, feed the cables into the fuselage through the slots,

and guide them to the front. The cables should cross over each other ONE time, making an X shape

inside the fuselage. Make sure the cables do not become twisted. Assemble the forward ends of the

pull-pull cables and attach them to the rudder servo horn, using the adjustors to set the tension. We want

the cables to be snug, with no sag and no play at the rudder-end of the system, but not severely tight.

Over the life of your Yak, you will need to periodically tighten these rudder cables. Slack rudder cables

can cause poor handling and lead to major trim problems on your Yak.

Use motor mount to mark holes in the firewall in the proper location as shown.

Drill holes in marked locations and install brushless outrunner motor onto firewall as shown.

NOTE: Your kit includes both 4mm nylock nuts and 4mm T-nuts for motor mounting. You may use either

style of nut, as you prefer.

NOTE: You may need to enlarge the center hole in the firewall to fit your motor's shaft collar.