3DHobbyShop.com Yak 54 Руководство по сборке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по сборке для Игрушка 3DHobbyShop.com Yak 54. 3DHobbyShop.com Yak 54 18 страниц. 55” arf rc aircraft

Test-fit the control horn into the slot to make sure it installs easily – you do not want to experience a

problem inserting the horn when you have CA glue on it. Install the control horn, first dripping medium

CA into the hole, then pushing the horn in, then adding thin CA around the horn. Allow to dry.

NOTE: Install all control horns on this airplane in this same way.

Attach the servo extension to the aileron servo lead.

Use the string installed inside the wing to pull your aileron servo lead through the interior of the wing as

shown.

Assemble the pushrod connectors onto the servo arms as shown. Use CA glue or threadlocker to lock

the nut on the bottom of the arm. If you do not use CA glue or threadlocker on all of the nuts on this

aircraft, they will come loose in-flight and the airplane will crash.

Insert your servo into the mount hole in the wing and attach with the servo mounting screws included with

your servos. The head of the servo (where the servo arm attaches) should be toward the FRONT of the

airplane.

Make and install the aileron pushrod as shown. Be sure to use CA glue or thread locker on the screw

and nut that attaches the ball-link to the control horn, and on the nut that attaches the pushrod connector

to the servo arm. If you do not use CA glue or thread locker on all of these ball-link screws on this

airplane, they will come loose in-flight and the airplane will crash. Trim the aileron pushrod to proper

length.