3DLab GANG PRINT BEAT PZL p.11c Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Игрушка 3DLab GANG PRINT BEAT PZL p.11c. 3DLab GANG PRINT BEAT PZL p.11c 19 страниц. Polish fighter
Печатать страницу
ASSEMBLY INSTRUCTION FOR
RC MODEL PRINTED ON 3D PRINTER
Visit our website
interested in. Then you get an access for the file download in g-code or STL format.
Download the files onto SD card. We try to optimize the universal G-code output
for the widest selection of printers and we test our products on several printer
brands and configurations. In case you are owner of the Prusa 3D printer use for
the print the files prusa G-code
Print all of the model parts on the 3D Printer
- minimum supported size of the printed surface is 20x20x15 cm
- the supported type of filament is PLA
Assemble the model according to the attached PDF manual
- for bonding of the model parts we recommend to use Super Glue (medium thick)
and Activator
PRODUCT CONTAINS
STL files of RC model PZL p 11.C in 1/10 scale
Universal G-code of RC model PZL p 11.C in 1/10 scale optimized for 3D printers
SimpliFy3D factory files of RC model PZL p 11.C in 1/10 scale
Asssembly instructions in PDF format
Scale markings in PDF format
MODEL SPECIFICATION
www.print-beat.com
Length
Wingspan
Weight of all printed parts
Takeoff weight
and purchase a product which you are
78,5 cm / 30,9 inch
110 cm / 43,3 inch
1250 g / (3s 2200mAh Li-Po, 4x servo, SC)
1
member of Group
900 g