Altman SPECTRA Series Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для DJ оборудование Altman SPECTRA Series. Altman SPECTRA Series 15 страниц. Uv led
Также для Altman SPECTRA Series: Руководство по эксплуатации (11 страниц), Руководство по программированию (18 страниц)

Печатать страницу
SS-UV40
evenly over the 0-99 display range.
NOTE: When entering or exiting fixed intensity mode, the display will go blank. Touch any button to
turn on display.
LOCKED MODE
To Lock (or unlock) the buttons:
1.
Wait a few seconds until the display goes blank,
2.
Press and hold the [ ONES ] button
3.
Press and hold the [ HUNDREDS ] button
4.
Release the [ ONES ] button
5.
Release the [ HUNDREDS ] button.
Display will show Loc
Loc for a moment and then blink.
Buttons will have no effect until they are unlocked.
PRIMARY & REPLICA MODE
To Turn On (or Off) the PRIMARY:
1.
Wait a few seconds until the display goes blank,
2.
Press and hold the [ HUNDREDS ] button
3.
Press and hold the [ ONES ] button
4.
Release the [ HUNDREDS ] button
5.
Release the [ ONES ] button.
PERSONALITIES
A total of 8 personalities are available. Each personality is made up of 3 settings: RESOLUTION (8 Bit /16 Bit),
MASTER (On /Off), and SMOOTHING (On/Off). These are displayed in the chart below.
The current active Personality # is displayed for about 1 second during power up. The format is Pxx
where xx is replaced by the active personality #01-08. To set the desired Personality, the fixture must be in
DMX mode.
To select the personality:
Press the buttons until the desired personality address 601-608) appears in the display (see list below).
Wait a few seconds, and a confirmation display will appear that shows a question mark? on the left, followed
by the personality #. This gives you an opportunity to either accept or reject the new setting.
To accept the personality, press the [ONES] button.
To reject the personality, press the [HUNDREDS] button.
Once the new personality is accepted, it is entered into memory and retained even if power is disconnected.
Installation & Users Manual
Page 11