CAME BPT MTMA/08 Руководство по программированию - Страница 4
Просмотреть онлайн или скачать pdf Руководство по программированию для Конференц-система CAME BPT MTMA/08. CAME BPT MTMA/08 8 страниц. Communication unit for xip systems
Печатать страницуProgramming calls
F
G
The operation can only be carried out from the entry panel with the blue LED
To change the entry panel from which calls are programmed, press one of the call buttons on the entry panel
you wish to use for programming.
You can force the switch from one programming mode to another by pressing the PROG button on the
power supply unit for 3 seconds and releasing within 6 seconds. If you force the switch to call programming
from button programming, the button units which have not been programmed are confi gured to 8 calls. If the
base unit is not programmed, calls are not confi gured.
Exiting Programming
H
1 1
<1''
<1''
The green LED
fl ashes. Lift the internal receiver
handset (if present) and press the door lock release
and AUX2 buttons
On the entry panel, press the call
button to be linked to the internal
receiver
that the setting has been stored
2 2 . End the call and repeat for the
other internal receivers.
2 2
Press the PROG button briefl y
try panel switch off .
.
1 1 . A beep confi rms
off (1 entry panel in
. The LEDs on the en-
).