Alto Triton 850 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Мойка высокого давления Alto Triton 850. Alto Triton 850 16 страниц.
Также для Alto Triton 850: Руководство по эксплуатации (16 страниц)
Печатать страницу
1.0 Preparation
Before starting up your high pressure
washer, we advise you to carefully read
through this instruction manual. Follow all
instructions to minimize the risk of injuries
when using the machine.
Prior to operation
Before starting up your machine please
check it carefully for any defects. If you find
any, do not start up your machine and con-
tact your ALTO distributor.
Especially check:
The insulation of the electric cable should
be faultless and without any cracks. If the
electric cable is damaged, it should be
replaced by an authorized ALTO distributor.
Mains power connection
The following should be observed when
connecting the high pressure washer to the
electric installation:
Only connect the machine to an installation
with earth connection.
The electric installation shall be made by a
certified electrician.
It is strongly recommended that the electric
supply to this machine should include a
residual current device (GFCI).
Extension cable
Extension cables should be of a watertight
construction and comply with the below-
mentioned requirements for length and cable
dimensions.
1.5 mm²
2.5 mm²
Cable connections should be kept dry and
off the ground.
Always uncoil the extension cable com-
pletely to avoid heat damage to the cable.
max
20
m
max
50
m
Water connection
Connect the high pressure washer by means
of a water hose to the water tap. You may
use an ordinary ¾" garden hose of min. 5 m
and max. 25 m. Attach the hose using a
quick connector.
NOTE: Connection to the public mains
according to regulations.
IMPORTANT! Only use water without any
impurities. If there is a risk of running sand
in the inlet water (i.e. from your own well), a
filter should be mounted.
Safety precautions
WARNING! High pressure jets
can be dangerous. Never direct
the water jet at persons, pets, live electrical
equipment or the machine itself.
The operator and anyone in the
immediate vicinity of the site of
cleaning should take action to
protect themselves from being struck by
debris dislodged during operation. Wear
goggles during operation.
Never try to clean clothes or footwear on
yourself or other persons.
Do not let children or people who have not
read the instruction manual operate the
machine.
Never use the machine in an environment
where there could be a danger of explo-
sion. If any doubt arises, please contact
the local authorities.
It is not allowed to clean asbestos-
containing surfaces with high pressure.
Safety devices
Locking device on spray handle
The spray handle features a locking device
(5b). When the pawl is activated, the spray
handle cannot be operated.
Thermal sensor
A thermal sensor protects the motor against
overloading.The machine will restart after a
few minutes when the thermal sensor has
cooled.
GB
13