Alto X23 Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Кроссовер Alto X23. Alto X23 13 страниц. 2-way stereo/3-way mono active crossover
Также для Alto X23: Руководство пользователя (12 страниц)
Unbalanced
TIP RING SLEEVE
TIP SLEEVE
TIP SLEEVE
TIP RING SLEEVE
TIP SLEEVE
TIP RING SLEEVE
4.3 Rack Mounting
The most secure mounting is on a universal rack shelf available from various rack manufactures or your music dealer.
The X23 Active Crossover fits into one standard 19" rack unit of space. Please allow
connectors on the rear panel. Be sure that there is enough air space
do not place the X23 Active Crossover on high temperature devices such as power amplifiers etc. to avoid overheating.
5. APPLICATION
5.1 X23 2-Way Stereo
To get such a typical application, configure your system and connect the wires in the following proper steps:
1.Release the mode switch to enter into the 2-way stereo mode.
2.Apply the stereo program sources from the Mixer to the Input Connectors of Channel1 and Channel2.
3.Output the Low frequencies signal to the power amplifier.
4.Output the High frequencies signal to the power amplifier.
5.Set LOW-HIGH Crossover Range of channel1 and channel2 to 10.
6.Power up the X23 first, then the power amplifier to run the system. While powered off, please ensure the power
amplifier is turned off first, then the X23.
HIGH
LOW
AC INPUT
110-120V
95-120V /210-240V 60-50Hz
Rated Power Consumption 8.5W
FUSE:
220-240V
210-240V: T100mAL 250VAC
95-120V: 200mA 250VAC
HIGH
REPLACE FUSE WITH CORRECT
TYPE ONLY
PHASE
Apparaten skall anslutas till
Jordat uttag nar den ansluts
Till ett natverk
A101
2WAY- STEREO
HIGH OUT 2 / (HIGH OUT)
LOW OUT 2 / (MID OUT)
/
( 3WAY- MONO)
CHANNEL 2
Tip
Ring
Sleeve
Tip
Sleeve
1
2
3
Tip
Sleeve
SLEEVE TIP
Tip
Ring
SLEEVE RING TIP
Sleeve
Tip
Sleeve
Tip
Ring
Sleeve
1
2
3
around the unit for sufficient ventilation
PUSH
STEREO MONO
NEW
TIDE
CD
HIGH
CD
3
BOOST
MODE
2
1
PHASE
BOOST
INPUT 2 / (NOT USED)
HIGH OUT 1 / (NOT USED)
LOW OUT1 / (LOW OUT)
INPUT 1 / (INPUT)
CHANNEL 1
8
at least an additional 4" depth
HIGH
LOW
PUSH
NEW
TIDE
3
2
1
1
2
3
1
2
3
Cent e r
Screen
Tip
Sleeve
Tip
Ring
Sleeve
Cent e r
Screen
Centre
Screen
1
2
3
for the
and please