Alto X40 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Кроссовер Alto X40. Alto X40 13 страниц. 4-way stereo active crossover

Печатать страницу

4. INSTALLATION & CONNECTION

4.1 Mains Connection

Please ensure that the

power cord into the wall outlet, use the same fuse as marked on the fuse holder at the AC

socket. The mains connection of the

and a standard IEC receptacle. It meets all of the international safety certification requirements.

4.2 Rack Mounting

The most secure mounting is on a universal rack shelf available from various rack manufactures or your music

dealer. The X40 Active Crossover fits into one standard 19" rack unit of space. Please allow

4" depth for the connectors on the rear panel. Be sure that there is enough air space

ventilation and please do not place the X40 Active Crossover on high tem

etc. to avoid overheating.

4.3 Audio Connection

The

LTO X40 Active Crossover

ways to support a variety of applications without any signal loss.

a. Wiring Configuration

Either the 1/4" TRS (Tip-Ring-Sleeve) jack or the XLR servo connector can be wired in balanced and unbalanced

modes. Please wire your systems as the following examples:

For 1/4" Phone jack

TS Type Unbalanced

For XLR connector

XLR Type Unbalanced

LTO X40 Active Crossover is set to the correct supply voltage before plug

LTO X40 Active Crossover is made by using the enclosed mains cable

presents with balanced XLR connectors, and it can be interfaced by several

Tip

Sleeve

Pin2 (+)

Pin3 (-)

(Linked to Pin1 manually,

Pin1 ( )

Tip

Ring

Sleeve

TRS Type Balanced

Pin3 (-)

)

power

at least

around

the unit for sufficient

perature

devices such as power amplifiers

Tip

Ring

Sleeve

TRS Type Unbalanced

Pin2 (+)

Pin1 ( )

XLR Type alanced

ging

the

connection

an additional