Alto DIGAN2.14 Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Оборудование для звукозаписи Alto DIGAN2.14. Alto DIGAN2.14 15 страниц. 2 x 14 band digital equalizer
Печатать страницу6.1.2 Edit Time Out (T.)
ON: If you don't operate the unit for 60 seconds, the unit will cancel your selection and settings that you
haven't stored, and reload the settings before storing the preset.
OFF: Disable the "Auto cancel" function.
6.1.3 Lock: avoid unauthorized tampering (L.)
ON: When power on the unit, the unit can not be operated. If you press any of the buttons, the LED display
will show "Lo" to indicate that the unit is locked.
OFF: Cancel the function of locking.
6.2 Reset Mode
When power on this unit, the front panel will show DIAGAN2.14 for a few seconds, press and hold UP then press
DOWN key timely to enter reset mode. Now, all the stored presets will be reset to defaults.
7. REMOTE CONTROL
7. REMOTE CONTROL
To operate this unit while connected to a PC, you need to download a Windows compatible DIGAN Editor program from
our website. To get a copy, please go to http://www.altoproaudio.com/html/download.php
IMPORTANT!
In remote control, all the controls on front panel are disabled.
7.1 Software installation
a. Install Digan Editor program: run DiganEditor100.exe (latest version may differ), then select the folder where
the program is installed and press NEXT, select the program location and press NEXT (it is suggested to use
default setting), now verify your setup information and press NEXT to finish your last step.
b. Install USB driver: run PL-2303 Driver Installer.exe, then press N for next step, at last finish your installation
and exit.
7.2 First steps with the PC Editor
With the DIGAN2.14 unit powered up and connected to the USB port on your PC, run the PC Editor program
by selecting the DIGAN EDITOR icon in the Windows PROGRAMS menu. Select NEW from the FILE menu,
then DIGAN2.14 and click OK, now select ON LINE from ACTION menu and the PC will scan its USB port to
verify the DIGAN2.14 unit is correctly connected. The NETWORK SCAN window should show the system
status (CONNECTED or DISCONNECTED). See following picture.
8