BALTENSWEILER HALO LED S Инструкции по монтажу и эксплуатации - Страница 14
Просмотреть онлайн или скачать pdf Инструкции по монтажу и эксплуатации для Фонарь BALTENSWEILER HALO LED S. BALTENSWEILER HALO LED S 16 страниц.
Также для BALTENSWEILER HALO LED S: Инструкции по монтажу и эксплуатации (5 страниц)
![BALTENSWEILER HALO LED S Инструкции по монтажу и эксплуатации](/uploads/products/server2/821983/821983.jpg)
Operating instructions
EN
The luminaire head can be rotated, swivelled and its height can be
1
adjusted, without any tools. Do NOT press the luminaire head down
at its end - risk of breaking!
Please note:
Only touch the luminaire head at either of its ends during operation -
the reflector area gets very hot.
Switching the luminaire on/off and dimming:
2
The light can be dimmed in stages or stepless with the upper button
(7 brightness levels). You can also deactivate the operation of the
luminaire by the upper button (please refer to page 13 in the section
on "programming the luminaire").
Button:
2a
(switch on top of the
control gear box)
- Short press: On / Off
- Long press: Dim
Master switch:
2b
(at bottom of the
control gear box)
- On / Off (no stand-by power)
External dimmers (including wall-mounted dimmers) are NOT
permitted and can damage the LEDs and the control gear.
12
Attention!
DO NOT TOUCH!
The reflector area gets very hot.
1
Upper button:
2a
On/Off/Dimming
Control gear
(holds magnetically).
Master switch
2b