Camille Bauer SINEAX CAM Руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы Camille Bauer SINEAX CAM. Camille Bauer SINEAX CAM 19 страниц. Graphic display for sineax cam
Также для Camille Bauer SINEAX CAM: Руководство по эксплуатации (12 страниц)
Печатать страницу
4.6 Measurement display of mean values
Mean values may be acquired with two
different interval times t1 and t2. The
corresponding measured quantities are freely
configurable. Therefore also the appropriate
measurement displays are variable. Up to 12
different pages may be displayed. The selection
is performed using the keys
Trend, last value t1 / t2: Last calculated mean
value and the trend of this measurement
Maximum, minimum t1 / t2 : The extreme
values of the acquired mean values with
timestamp
Reset maximum, minimum: Allows to
selectively reset the extreme values
Mean values t1 / t2
For each selected measurand the last acquired
mean value as well as the trend value is shown.
Monitoring of trend values by means of limit
values makes sense especially for power
quantities.
Maximum, minimum t1 / t2
For each configured mean value quantity the
maximum and the minimum value with
timestamp (time of occurrence) is shown.
Details about the timestamp may be found in
the chapter settings of the clock.
Reset max., min.
For all acquired values or selectively only for
parts extreme values can be reset by pressing
for al longer time(>1s).
Note: Depending on the interval time t1 resp. t2
it may take hours until a new extreme value is
stored.
and
.
12