Camille Bauer KINAX N705-MEMS Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Передатчик Camille Bauer KINAX N705-MEMS. Camille Bauer KINAX N705-MEMS 12 страниц. Canopen inclination transmitter
Также для Camille Bauer KINAX N705-MEMS: Руководство по эксплуатации (13 страниц)
Печатать страницу4. Assembly and installation
Ensure a safe working environment during assembly, installation and maintenance work. Disconnect the power supply of the
primary conductor and secure it against unintentional reconnection.
Magnetic fields of high intensity can vary the values measured by the transformer. Avoid installation near permanent magnets,
electromagnets or iron masses that induce strong changes in the magnetic field. If there are any irregularities, we recommend
realigning or moving the transformer in the most appropriate area.
Avoid impacts or shocks on the housing
• Please take care that the installation position of the inclination transmitter is perpendicular to the gravity of the earth.
• The inclination transmitter are supplied as standard with mounting housing and 4 M4 cylinder screws.
• Now connect the device according to the wiring diagram.
-90° (8 mA)
5. Electrical connections
Attention: danger to life! Ensure under all circumstances that the leads are free of potential when connecting them!
Do not electricly modify the device nor carry out any wiring work when energised.
Do not plug in or unplug electric connection when energised
It is to be noted, that the data given on the type plate are respected!
The national regulations for the installation and selection of the material of the electrical cables must be followed!
To connect the electrical cables, the inclinometer has a sensor plug M12x1.5 / 4-pin.
Connection scheme
µC
• Provide a separate power supply for the device in case of consumer loads with high interference levels.
• Install the entire plant in an EMC-compatible manner. Installation environment and wiring can affect the EMC of the device.
PM 1002077 000 00
Mounting position
0° (12 mA)
D
sin
cos
A
A
B
E
-
+
+
GND
0 V 24 V
4-20 mA
Inclination transmitter KINAX N705-MEMS 4...20 mA
+90° (16 mA)
Pin assignment
Pin assignment:
1 = GND / 0 V
2 = Supply 9...33 VDC
3 = Output 4...20 mA
4 = Output GND
(recommended for 4-wire operation)
Drilling and cut-out diagrams
50
M4
10/12