3DUpFitters CR-10 Smart Enclosure Kit Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для 3D-принтеры 3DUpFitters CR-10 Smart Enclosure Kit. 3DUpFitters CR-10 Smart Enclosure Kit 19 страниц.

Печатать страницу

Everything You Wanted to Know About Screwing But

Were Afraid to Ask

Screw

Tool Needed

30-50mm

Hex Cap

3mm Hex Wrench

Head

12mm Hex

3mm Hex Wrench

Cap Head

16mm Hex

3mm Hex Wrench

Cap Head

#6 3/4"

Philips Head

Wood Screw

Screwdriver

Probably the most confusing thing about assembling this enclosure will be which fastener or

screw to use. Luckily it's pretty easy to ﬁgure out once you know the system. While the exact

screw to use will be detailed in each section of the manual, you probably won't need to refer to

it once you know the secrets.

The most common screw is the 12mm hex cap head screws. The 12mm screws are long

enough to attach things to the acrylic front, top, sides and back. Each section will describe

exactly which screw to use, to read carefully and use the speciﬁed screw for the best results.

The actual length of the "long" screws to attach the fan and or ﬁlter will vary depending on the

depth of the particular shipment of fans we happen to get that month. They won't be hard to

spot since they'll be the longest thing in the bags.

Note that you'll need a 3mm hex wrench for most of the screws. We don't include one in the

kit since they invariably end up in a drawer or landﬁll. Anyone with a 3D printer should invest in

a nice metric hex wrench set, since there will be many adjustments to be made along the way.

Finally, and we can't stress this enough: DON'T OVERTIGHTEN THE SCREWS

Leave the screws a little loose until the end adjustment phase. During that process you'll be

hand-tightening until the screws are snug, but you can easily use so much force the plastic

pieces or the acrylic crack. Please don't be that guy.  

Usage

Attach fan/ﬁlter, attach large

front latch mounts

Connectors, hinges

Knobs, small latch mounts on

some models

Attach magnetic latch to mount

Relative Size