DivioTec TBR721 Руководство по быстрой установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Камера безопасности DivioTec TBR721. DivioTec TBR721 3 страницы.

Quick Installation Guide

Cable Outlet Description

1. The camera features two waterproof connectors,

the right one in the diagram is for PoE connection,

while the left one is for line-in, line-out, DC 12V/

AC 24V and DI/DO connections.

2. The left one features four wire holes. Please

cover unused holes with sealing plugs to prevent

water from entering.

3. Applicable cable diameter:

* Ø 1.8~2.5mm (Left)

* Ø 4.7~6.9mm (Right)

Hardware Installation

1. Position the placement sticker at the desired installation location and use a driller to drill the holes

on the sticker.

2. Insert three screw anchors into the holes then place the wall mount base on top of them with the

mounting holes aligned.

3. Wire the required cables through the cable opening on the front of the wall mount bracket. Then,

attach and secure the wall mount bracket to the wall mount plate with two M5 screws. Next, install

the waterproof connectors onto the cables on the front of the wall mount bracket.

Line-out

Ethernet/

Line-in

POE

DC 12V/AC 24V

DI/DO

4. Secure the camera to the wall mount bracket with the four screws and hex wrench. Open the

camera's cover and connect the cables to their corresponding ports on the MB module. Then, glue

the dehumidifier packet onto the metal bracket using the adhesive sticker on its back, as depicted

in the diagram below. Quickly close the camera's cover and ensure the clip is locked in position to

prevent the dehumidifier packet from losing its effectiveness.

5. Secure the top cover to finish the installation.

Ver.A (P/N: 60177B0320X00)

Dehumidi er

packet