Baltimore Aircoil Company ICE CHILLER TSU-761M Инструкции по монтажу и установке - Страница 7

Просмотреть онлайн или скачать pdf Инструкции по монтажу и установке для Кондиционер Baltimore Aircoil Company ICE CHILLER TSU-761M. Baltimore Aircoil Company ICE CHILLER TSU-761M 16 страниц. Thermal storage unit for internal melt

Печатать страницу

AUTHORIZED PERSONNEL

The operation, maintenance and repair of this equipment should be undertaken only by personnel authorized and

qualified to do so. All such personnel should be thoroughly familiar with the equipment, the associated systems

and controls and the procedures set forth in this and other relevant manuals. Proper care, personal protective

equipment, procedures and tools must be used in handling, lifting, installing, operating, maintaining and repairing

this equipment to prevent personal injury and/or property damage. Personnel must use personal protective

equipment where necessary (gloves, ear plugs, etc...)

MECHANICAL SAFETY

Mechanical safety of the equipment is in accordance with the requirements of the EU machinery directive.

Depending upon site conditions it also may be necessary to install items such as bottom screens, ladders, safety

cages, stairways, access platforms, handrails and toe boards for the safety and convenience of the authorized

service and maintenance personnel.

At no time this equipment should be operated without all access cover panels and access doors in place.

For more information consult your local BAC Balticare representative.

LIFTING

CAUTION

Failure to use designated lifting points can result in a dropped load causing severe injury, death

and/or property damage. Lifts must be performed by qualified riggers following BAC published

Rigging Instructions and generally accepted lifting practices. The use of supplemental safety

slings may also be required if the lift circumstances warrant its use, as determined by the rigging

contractor.

LOCAL REGULATIONS

Installation and operation of cooling equipment may be subject to local regulations, such as establishment of risk

analysis. Ensure regulatory requirements are consistently met.

Non-walking surfaces

Access to and maintenance of any component needs to be performed in accordance with all local applicable laws

and regulations. If the proper and required access means are not present, temporary structures need to be

foreseen. Under no circumstance can one use parts of the unit, that are not designed as an access mean, unless

measures can be taken to mitigate any risks that might occur from doing so.

Modifications by others

Whenever modifications or changes are made by others to the BAC equipment without written permission of BAC,

the party who has done the modification becomes responsible for all consequences of this change and BAC

declines all liability for the product.

1 General information

W W W . B A L T I M O R E A I R C O I L . E U