DivioTec Full HD Speed Dome IP Camera Краткое руководство

Просмотреть онлайн или скачать pdf Краткое руководство для IP-камера DivioTec Full HD Speed Dome IP Camera. DivioTec Full HD Speed Dome IP Camera 2 страницы. Diviotec full hd speed dome ip camera

Печатать страницу

This guide is for quick installing and connecting the Full HD Speed Dome IP Camera. For more details, please refer to

the User's Manual of the camera in the supplied CD.

Camera's Connectors

Indoor

Connector

Alarm I/O

Alarm I/O connection

Default Button

Press the button with one figure for at least 20 seconds to restore the system.

Audio I/O

Audio I/O connection

RJ-45

For network and PoE+ connections

Power (AC 24V)

Power connection

Insert the microSD card into the card slot to store videos and snapshots.

microSD Card Slot

Do not remove the microSD card when the camera is powered on.

NOTE: It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to

support long term continuous data read/write. Please contact the manufacturer of the microSD card for

information regarding the reliability and the life expectancy.

Power Connection

To power up the camera, connect the AC 24V power adaptor to the power connector of the camera and the power

outlet. Refer to the diagram and the pin definition table below for connection. Alternatively, users can use an Ethernet

cable and connect it to the RJ-45 connector of the camera and an IEEE 802.3at 60W PoE+ switch.

Definition

AC 24V 1

GND

AC 24V 2

Ethernet Cable Connection

Connect one end of the Ethernet cable to the RJ-45 connector of the camera, and plug the other end of the cable to

the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the

PC.

NOTE: Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please check

the LAN connection.

Full HD Speed Dome IP Camera Quick Guide

Outdoor

Definition

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

Alarm I/O Connection

Please refer to the diagram and pin definition tables below for alarm I/O connection.

Definition

Alarm Out NO 1

GND

Alarm Out NC 1

Alarm Out NO 2

Alarm Out COM 1

Alarm Out NC 2

Audio I/O Connection

Please refer to the diagram and the pin definition table below for audio I/O connection.

Definition

Audio Out

GND

Audio In

Before Login to the Camera

A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the

camera, please ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and

plug-ins or setting Internet's security level to default. For further details, please refer to the User's Manual in the

supplied CD.

ActiveX Controls and Plug-ins Settings

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>, and click on <Custom level> to

change ActiveX settings.

Step 4: Set "ActiveX controls and plug-ins" items to

<Prompt> or <Enable>.

Camera Login

The default IP address of the camera is: 192.168.0.250. Therefore, to access the camera for the first time, please set

the IP address of the PC as: 192.168.0.XXX; for example:

IP Address: 192.168.0.100

Subnet Mask: 255.255.255.0

 Key in the camera's IP address in the URL bar of the web browser window and hit "Enter".

 Enter the default username (Admin) a

username is case sensitive.

Definition

Alarm Out COM 2

Alarm In 3

GND

Alarm In 2

Alarm In 4

Alarm In 1

Internet Security Level

Step 1: Start the IE Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>.

Step 4: Down the page, click on <Default Level> and

<OK> to confirm the setting. Close the browser

window, and open a new one later for

accessing the IP camera.

nd password (1234) in the prompt request dialogue. Note that