Baltimore Aircoil Company TSU 1440D Инструкции по монтажу и установке - Страница 7

Просмотреть онлайн или скачать pdf Инструкции по монтажу и установке для Промышленная электротехника Baltimore Aircoil Company TSU 1440D. Baltimore Aircoil Company TSU 1440D 20 страниц. Tsu-c-d ice chiller thermal storage unit for external melt

Печатать страницу

MECHANICAL SAFETY

Mechanical safety of the equipment is in accordance with the requirements of the EU machinery directive.

Depending upon site conditions it also may be necessary to install items such as bottom screens, ladders, safety

cages, stairways, access platforms, handrails and toe boards for the safety and convenience of the authorized

service and maintenance personnel.

At no time this equipment should be operated without all access cover panels and access doors in place.

For more information consult your local BAC Balticare representative.

ELECTRICAL SAFETY

Each fan associated with this equipment should be installed with a lockable disconnect switch located within sight

of the equipment. No service work should be performed on or near the fans unless motors are electrically isolated.

Each motor associated with this equipment should be installed with a lockable disconnect switch located within

sight of the equipment. No service work should be performed on or near the motors unless motors are electrically

isolated.

LIFTING

Caution

FAILURE TO USE DESIGNATED LIFTING POINTS CAN RESULT IN A DROPPED LOAD

CAUSING SEVERE INJURY, DEATH AND/OR PROPERTY DAMAGE. LIFTS MUST BE

PERFORMED BY QUALIFIED RIGGERS FOLLOWING BAC PUBLISHED RIGGING

INSTRUCTIONS AND GENERALLY ACCEPTED LIFTING PRACTICES. THE USE OF

SUPPLEMENTAL SAFETY SLINGS MAY ALSO BE REQUIRED IF THE LIFT CIRCUMSTANCES

WARRANT ITS USE, AS DETERMINED BY THE RIGGING CONTRACTOR.

LOCAL REGULATIONS

Installation and operation of cooling equipment may be subject to local regulations, such as establishment of risk

analysis. Ensure regulatory requirements are consistently met.

Non-walking Surfaces

Access to and maintenance of any component needs to be performed in accordance with all local applicable laws

and regulations. If the proper and required access means are not present, temporary structures need to be

foreseen. Under no circumstance can one use parts of the unit, that are not designed as an access mean, unless

measures can be taken to mitigate any risks that might occur from doing so.

Modifications by others

Whenever modifications or changes are made by others to the BAC equipment without written permission of BAC,

the party who has done the modification becomes responsible for all consequences of this change and BAC

declines all liability for the product.

1 General Information

W W W . B A L T I M O R E A I R C O I L . E U