Divis CH 03204 Инструкции - Страница 2
Просмотреть онлайн или скачать pdf Инструкции для Камера безопасности Divis CH 03204. Divis CH 03204 2 страницы. Day & night vandal dome camera
Также для Divis CH 03204: Руководство (2 страниц)
Печатать страницу
OSD Menu Structure 1
S
e
u t
p
M
e
n
u
Default Set
DC
Lens
Brightness : 25
Shutter : Manual
AGC : High
Exposure
Sens_up : -
White Bal
ATW
Off
SSDR
Backlight
Off
DNR3
On
Day/Night
Auto
Special
-
Exit
Save
OSD Menu Structure 2
Special Menu
Default Set
V-Rev : Off
H-Rev : Off
D-Zoom : Off
Image Adj
Dis : Off
Font Color : Blue
Sharpness : On
Monitor
LCD
Camera ID
Off
INT
Sync
Motion Det
Off
Privacy
Off
Cam ID : 1
Baudrate : 9600
Parity : 8-N-1
COMM ADJ
Ret Pkt : Enable
(RS485 IS NOT
Disp Cam ID : Off
SUPPORTED)
Protocol : STW(SPD)
Return
Language
English
Return
-
M
e
n
u
DC / Manual
Brightness: 1 ~ 70 Level Selectable
Esc : Min/Max (Level Adjustable)
Manual : X512 ~ 1/120K
A.FLK
---
AGC : Off / Low / High
Sens-up : Off / Auto (X2~X512 Level Adjustable)
Return
ATW / Indoor / Outdoor / AWC / Manual
(R Gain / B Gain: Level adjustable)
On/Off (Limit : 1~15 Level Adjustable)
Off
BLC : Level (Low/Middle/High)
/Top/Down/Left/Right
HLC : Level (Low/Middle/High)/Limit/Mask
Color/Mask Tone/Top/Down/Left/Right
On / Off (Level : 1 ~ 32 Level Selectable)
Auto/External(NOT SUPPORT)/Color/B/W
-Color
B/W : Duration(Fast/Slow), Dwell Time
=>
-B/W COLOR : Duration(Fast/Slow), Dwell Time
=>
-Return
Refer to below
Save, Not Save, Reset
Menu
V-Rev : On / Off
H-Rev : On / Off
D-Zoom : On / Off (X1 ~ X16)
Dis : On / Off
Font Color : White, Yellow, Green, Red, Blue
Sharpness : On / Off (Level : 1~20 Level adjustable)
Return
LCD / CRT / USER
Gamma (Level : 0.2 ~ 1.0 Gamma Selectable)
PED Level (Level : 0 ~ 70 Level Adjustable)
Color Gain (Level : 0 ~ 70 Level Adjustable)
Reset
On / Off
INT (Phase : 0 ~ 359 Level Selectable)
Sensitivity : Area1 ~ Area8
Area Mode : On/Off
Sel Pos : L_TOP / R_TOP / L_BOTTOM / R_BOTTOM
XPOS / YPOS : Position adjustable
FILL
SET
Return
Area Select : Area1 ~ Area12
Mode : On/Off
Mask Color : Green/Red/Blue/Black/White/Gray
Mask Tone : Level Adjustable
Top/Bottom/left/Right : Position Adjustable
Cam ID : ID Selectable
Baudrate : 2400/4800/9600/19200/38400/57600
Parity : 8-N-1/8-E-1/8-O-1
Ret Pkt : Enable/Disable
Disp Cam ID : Off
Protocol : STW(SPD)/PELCO-D/PELCO-P/SEC/
BOSCH/HONEYWELL/VICON/PANASONIC
English/Japanese/Spanish/Korean/
French/Portuguese/Taiwanese
Return to the SETUP menu
Specification
Model
Type
Day & Night Vandal Dome Camera
Image Sensor
1/3" Sony SUPER HAD II CCD
Effective Pixel
768(H) x 494(V)
6.35µm(H) x 7.4µm(V)
Cell Size
Resolution
HORI. Color 600 TV Line, B/W : 700 TV Line
TV Type
NTSC
Sync. Type
Internal
Scanning System
2:1 Interlace
Scanning Frequency H.
15.734 KHz
Scanning Frequency V.
59.94
Hz
Video Out
1.0 Vp-p (Sync. Negative) Termination 75
Gamma Characteristic
= 0.45 typ.
Min. Illumination
0.1 Lux at Color(F1.2)
S/N Ratio
52dB or More (AGC OFF, Weight ON)
AWB
ATW / OUTDOOR / INDOOR / MANUAL / AWC
(1,700°K~11,000°K)
Gain Control
Off / Low / High
Shutter
1/60 ~ 1/120,000 sec
Test Illumination Area
AVERAGE TEST ILLUMINANCE BY FRONT VIEW
Current Consumption
200mA Max.
Regulated DC 12V
Supplied Voltage
Reverse Polarity Protection
Yes
Lens
2.8~11mm
Operation Temp / Humidity
-10 ~ 50 °C / 30% to 80% RH
Preservation Temp / Humidity
-20 ~ 60 °C / 20% to 90% RH
Dimension
153mm(W) X 105.2mm(H)
Weight
Approx. 1.2kg
Special Function
Function
Day & Night
Color/BW/Auto/EXT(Built in Dc Motor Driver)
BLC
BLC/HLC/Off
SSDR
On/Off
DIS
On/Off
Blemish Compensation
256 Point(Even 128 point, Odd 128 point)
Sens-up
On/Off(x2 ~ x512)
OSD Language
English/Korean/Spanish/Japanese/
French/Portuguese/Taiwanese
Motion Detection
On/Off (8 Zone)
DNR
On/Off (2D+3D)
Digital Zoom
On/Off (x1~x16)
Privacy
On/Off(12 Zone)
Mirror(H-REV)
On/Off(Horizontal)
Flip(V-REV)
On/Off(Vertical)
Freeze
On/Off(Stop)
Sharpness
On/Off(Level Adjustable)
Troubleshooting
If you have a trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
The image does not
Check the power source for the monitor and camera
appear on the screen.
and assure that the voltage and polarity are properly
connected and being supplied correctly.
The image on the
Check if the lens is stained. If dirty, clean the lens
screen is dim.
with a soft, clean cloth.
Adjust the Back Focus of the lens again.
Check if you have connected the camera to a proper
The surface of the
power source and if there is no problem with the power,
camera case is hot and
turn the unit off immediately and seek assistance from
a black line appears on
our After Service department.
the screen.
Check if the camera is pointed toward the sun or a
The screen blinks a lot.
fluorescent lamp.
Adjust the angle or location of the camera if too much
light is coming into the screen.
CH 03204
±
15%
Condition