Eseye HERA600 Series Руководство по конфигурации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Сетевой маршрутизатор Eseye HERA600 Series. Eseye HERA600 Series 11 страниц.

1 Getting started

Connect to the Hera Router using an Ethernet cable, WiFi or Cellular connection (if

active) and open an ssh session by using appropriate software e.g. Putty.

This gives command line access to the advanced features of the router.

To enable the serial feature on ports 1 and / or 2, type the appropriate commands

from the list:



feature serial2ip add port 1



feature serial2ip add port 2

These commands will add the ports to the configuration. It is next necessary to

configure the baudrate and number of bits for each port.



feature serial2ip set port portno baud _baud_

This command is used to set the baud rate of the port specified by the portno. e.g.



feature serial2ip set port _portno_ databits 5



feature serial2ip set port _portno_ databits 6

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html