3DUpFitters CR-10 S5 Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Стойки и подставки 3DUpFitters CR-10 S5. 3DUpFitters CR-10 S5 15 страниц. Enclosure kit

The S4/S5 version also has three new connectors at the top and on the left and rights
side when viewed from the front.
2. Assemble Front Door

Locate the magnetic latches and use the wood screws to
attach them to the latch mounts. Hand tighten and make
sure they're secure, but do not over tighten or they may
strip. The latch can be later adjusted front-
to-back to make sure the door is flush with
the door frame.
Each latch mount is attached via three
screws. Two M4 10mm cap heads are used
to attach the latch mount to the side, while
a 30mm cap head secures the latch mount
to the door frame.
Copyright 2019 3DUpfitters
6