camius IRIS Series Руководство по быстрой настройке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Камера безопасности camius IRIS Series. camius IRIS Series 6 страниц.

Installation Guidelines

The following guidelines ensure proper installation.

Camius IP cameras can be wall or ceiling-mounted;

to ensure an exact fit, use the mounting template

sticker at the desired camera installation point as a

guide for drilling anchor holes.

BOLT series Bullet-shaped cameras come with an

adjustable mounting bracket; loosen the camera

bracket using the included hex key; make sure the

hex screws are loosened enough for the bracket to

move freely. Once the mounting screws are in,

tighten the hex screws to the desired position.

IRIS series Dome-shaped cameras come with an

outer ring. First, turn the outer ring counter-clock-

wise and remove the outer ring to access the base

for mounting, then align the base and mounting

template holes.

After installing the base using the mounting screws,

tighten the outer ring to lock the camera in place..

Cable Management

Choose one of the following methods to direct

and conceal camera wires:

-Through a wall: drill a 5/8" hole according to the

mounting template.

-Use a weatherproof box.

-Surface wiring, a groove on the mounting bracket

allows the camera cable out on the surface, make

sure the exit point is pointing downwards.

Use the weatherproof ethernet sealer as demon-

strated below to seal the ethernet connector.

Page 1 of 5