ESI ESCTP-RF Инструкции пользователя - Страница 8

Просмотреть онлайн или скачать pdf Инструкции пользователя для Термостат ESI ESCTP-RF. ESI ESCTP-RF 16 страниц. Programmable cylinder thermostat
Также для ESI ESCTP-RF: Руководство по установке (12 страниц)

Печатать страницу

2. Operation modes

Display and button functions

1.1

By default, the thermostat will start in MANUAL mode.

Use the dial to select the set temperature. (Default 50.0°C)

The cylinder thermostat will permanently aim to maintain the

cylinder at the set temperature

N.B: When in standalone configuration (not paired to any other

wireless device), the display will show Z1.

OFF

2.2

To turn OFF the cylinder thermostat, press and hold the Mode

button for 5 seconds. When OFF mode has been selected, the

display will also turn off.

To turn the cylinder thermostat back ON, press and hold the

Mode button for 5 seconds. When turned back on, the display

will also turn on.

AUTO

2.3

If the thermostat is paired with a compatible Wi-Fi room

thermostat (i.e. ESRTP6WHW, ESRTP6CW, etc.) The AUTO

mode will be available both through the "heating and hot water

schedule" on the room thermostat, or through the ESi Controls

Centro app.

Once the schedule has been set, the cylinder thermostat will ask

for heat at the set ON times, and it will use the set temperature

previously selected.

N.B: When in Auto mode, the display will show Z2 instead

of Z1.