ESI EPPA2-KIT Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стойки и подставки ESI EPPA2-KIT. ESI EPPA2-KIT 12 страниц. Dual monitor arm conversion
Печатать страницу
EPPA2-KIT
Remove and Disassemble the Single Arm Base Assembly
The base assembly must be removed and disassembled in order to remove the monitor arm. Follow the
procedures below for the particular method used to attach the base to the worksurface.
IMPORTANT: Recycle the single arm base assembly. Contact ESI Customer Service at 1-800-833-3746.
Clamp Method
1. Turn the knob to loosen the clamp. Remove the base assembly from the worksurface.
2. Remove the clamp from the clamp L-bracket using the 5mm Allen key.
3. Peel the clamp pad from the base and L-bracket.
4. Remove the clamp L-bracket from the underside of the base using the 4mm Allen key.
1.
Loosen
Grommet Method
• Unscrew the grommet knob and remove the grommet bar.
• Remove the base assembly from the worksurface.
Unscrew
Grommet
Knob
4
2.
5mm
Allen
Key
M6x10
Socket Cap
Remove
Grommet Bar
BASE ASSEMBLY REMOVAL
3.
Remove
Clamp
Pad
Remove
Base Assembly
4.
M6x12
Flat Head
4mm
Allen Key