ClearLink 905 Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Двухстороннее радио ClearLink 905. ClearLink 905 10 страниц.

To adjust the volume, turn the Volume Control Button (#2) clockwise (volume up) or counter clockwise

(volume down). To determine the current volume level prior to turning the radio on, depress and hold the

Monitor Button (#6). The Speaker will emit static approximating the current volume.

Battery Indicator

The Battery condition indicator located on the display, will show the amount of charge in the batteries

powering the radio. Replace alkaline or recharge NiCad batteries as soon as possible after this signal shows

less than two segments lit.

Battery "Reserve" Feature.

In order to reserve battery power, the radio is programmed to cycle from a fully operational mode to a

standby mode if no transmissions are sent or received within a period of approximately six seconds. The

cycle is continuous, and is interrupted whenever a transmission is sent or received.

This feature increases the useful battery life by approximately 50%.

Belt Clip & Adjustable Wrist Strap.

To install the Wrist Strap, thread the thin end of the Strap through the hole at the top of the Belt Clip

creating a small loop. Thread the other, thicker end of the Strap through the small loop and pull the Strap

tight.

To remove the Belt Clip from the back of the radio, pull it gently out and down.

Display Backlight

Press and hold the "F" button for 5 seconds. A beep will be heard. The backlight will remain on for

approximately 5 seconds and will turn off to save battery power.

Key Lock

To avoid accidental channel changes the keypad may be locked. To lock, Press the "F" button and then

press the "M" (Monitor) button. The KEY icon will appear in the display. In this lock mode only the PTT,

CALL and "F" buttons are active, if any other button is pressed 3 quick beeps will be heard.

To unlock, press "F" and then press "M". The KEY icon will disappear.