ESI FLEX2-SLV Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Внутренняя отделка ESI FLEX2-SLV. ESI FLEX2-SLV 12 страниц. Electric table base

ASSEMBLY

STEP 7

Attach a foot to each of the legs.

• Use four M10x20 screws per foot.

• Tighten the screws with an 8mm Allen key.

STEP 8

Adjust the position of the frame before screwing

it to the work surface.

• Align the rear of the feet with the rear of the table.

• Expand the frame, if necessary, and center it from

side to side. See Steps 9 and 10.

• Expand the top supports, if necessary. See Step 11.

STEP 9

Expand the frame, if necessary. The frame should extend the full width of the table, allowing a minimum

space of 1" (25mm) on each side.

• The frame can be expanded from

34" (86cm) wide to 64" (163cm) wide.

The inner channel includes guides to

assist in setting the desired width.

• Be sure the frame is centered

on the work surface.

STEP 10

After expanding the frame,

re-install the four machine screws

and tighten the two set screws.

• The tab on the inner channel should

be approximately centered.

8mm Allen Key

Align Rear of Feet with Rear of Table

Center

Expands from

34" to 64"

ALL-FLEX

ELECTRIC TABLE BASE

™

1" Minimum

Tighten

Set Screws

Install

Machine

Screws

1" Minimum Space

M10x20

Each Side