Akiyama CDJ-MP100 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для CD-плеер Akiyama CDJ-MP100. Akiyama CDJ-MP100 13 страниц. Professional cd player
Печатать страницуc d j - m p 1 0 0
FRONT PANEL
1. STOP
- The stop button is used to stop CD playback. Never open
the transport door without stopping playback first.
2. OPEN
(Transport Tray Open) - This button is used to open the disc
door.
When a disc is loaded, the tray will not open unless the unit is
NOTE:
in pause or cue mode.
3. LIQUID CRYSTAL DISPLAY (LCD)
indicates all the functions (play, pause, etc.), as they occur. This
display is viewable at several comfortable angles. The LCD will be
described in the next section.
4. SGL/CTN
- This button changes the play mode between Single and
Continuous. In single mode the unit will play a single track and return
to cue mode. In continuous mode the unit continues to play track by
track.
- The CUE LED will glow when the unit is in cue
5. AUTO CUE LED
mode. The LED will also flash every time a new CUE POINT is set.
- Pressing the CUE button during playback immediately
6. CUE
pauses playback and returns the track to the last set cue point. The
CUE button
can be held down to momentarily play the CD. When you release the
CUE button it instantly returns to the last set CUE POINT.
7. PLAY/PAUSE LED
- While in play mode the play LED will glow,
and while in pause mode the play LED will flash.
8. PLAY/PAUSE BUTTON
BUTTON causes the operation to change from play to pause or from
pause to play.
- This LED will flash each time the loop "IN" button is
9. LOOP LED
pressed indicated the cue point or loop starting point has been set.
10. LOOP IN BUTTON
- This button allows you to set a CUE
POINT. This button also sets the starting point of a loop.
11. LOOP OUT BUTTON
- This button serves three functions. This
button is used to set the a loops ending point, to exit a loop once
engaged, or restart a loop once it has been exited.
12. SEARCH/SCAN BUTTON
or fast reverse a track. Holding down the button for a prolonged
amount
of time will increase the scanning speed. Tapping the button is the
preferred method for locating a specific cue point.
13. SEARCH/SCAN BUTTON
or fast-forward a track. Holding down the button for a prolonged
amount of time will increase the scanning speed. Tapping the button is
the preferred method for locating a specific cue point.
- This buttons is used to select a track.
14. TRACK BUTTON
Tapping this button will back- skip to the previous track, holding
down this button will rapidly back-skip through the tracks on a CD.
- This buttons is used to select your desired
15. TRACK BUTTON
memmory
- This high quality LCD
- Each press of the PLAY/PAUSE
- This button is user to reverse scan
- This button is user to forward scan
PART NAMES AND FUNCTIONS
track. Tapping this button will forward skip to the next track, holding
down this button will rapidly forward skip through the tracks on your
CD.
16. RELOOP/ EXIT LED
"OUT" button is pressed indicated the cue point or loop starting point
has been set.
17. TIME MODE
time values. Time can be displayed as elapsed track time, remaining
track time, and total disc remaining time.
18. PITCH BEND
(+) PITCH BEND
"BUMP" in the CD's pitch speed (Beats per minute - BPM) when the
PITCH function is activated. This function allows the beats between
two CD's or any other music source to match. This is a momentary
function. When the button is depressed the pitch speed will
automatically return to PITCH SLIDER'S selected pitch. Holding
down this button down yields a maximum of +16% pitch. Be sure to
remember that this function is a momentary pitch adjustment, for a
more precise adjustment use the PITCH SLIDER'S to match the
BPM's with another playing music source.
(-) PITCH BEND
"Slow Down" in the Cd's pitch speed (Beats per minute - BPM) when
the PITCH function is activated. This function allows
he beats between two CD's or any other music source to match. This is
a momentary function. When the button is depressed the pitch speed
will automatically return to PITCH SLIDER'S selected pitch.
Holding down this button down yields a maximum of -16% pitch. Be
sure to
remember that mum of -16% pitch. Be sure to remember that for a
more precise adjustment use the PITCH SLIDER'S to match the
BPM's
with another playing music source.
19. PITCH SLIDER
percentage when the function is activated. The slider is a set
adjustment and will remain set until the pitch slider is moved or the
PITCH function has been turned off. This adjustment can be made
with or without a CD in the drive. The pitch adjustment will remain
even
if a disc has been remove, and will reflect on any other disc loaded into
the unit. That is to say, if you set a +2% pitch on one disc, remove that
disc and insert another, that disc too will have a +2% pitch. The
amount of pitch being applied will be displayed in the LCD. Use this
slider to match the BPM's of this unit to that of another music source.
By changing the pitch of one disc with respect to the other in this way,
the beats can be matched.
c d j - m p 1 0 0
- This LED will flash each time the loop
- The TIME button is used to change the displayed
- The (+) pitch bend function creates a momentary
- The (-) pitch bend function creates a momentary
- This slider is used to adjust the playback pitch
4