1 BY ONE Audio-Technica AT3600 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Проигрыватель 1 BY ONE Audio-Technica AT3600. 1 BY ONE Audio-Technica AT3600 14 страниц. Belt drive turntable with built in speakers

Печатать страницу

Included Items

Before installing the turntable, check the package contents to ensure all parts below

are included and free of visible damage. Please retain the original packaging materials

for exchange or return purposes.

1) Turntable Unit

2) Slip Mat

3) Turntable Platter

4) Counterweight

5) 45 RPM adapter

Installing the turntable

• Mount the turntable on a level surface.

• To avoid the eﬀects of vibrations and acoustic pressure, do not mount the turntable

next to items such as speakers.

• The turntable may pick up radio static if placed next to a radio. Therefore, try to keep

the turntable away from transmission devices such as radios.

• If the turntable is near equipment (cell phone, etc.) that emits strong radio waves,

noise may occur.

Turntable Platter and Belt Setup

1. Remove the protective packaging and ensure the

turntable is placed on a sturdy and level surface.

2. Remove the screw between the spindle and tonearm.

This screw is used for securing the tonearm base during

shipment and does not need to be reinstalled.

6) Drive Belt

7) Sub-platter

8) Power Adapter

9) Cartridge Alignment Protractor

10) Instruction Manual

3. Insert the sub-platter into the turntable spindle located in the middle of the

turntable.

4. Loop the drive belt around the sub-platter and motor pulley (brass-colored).

5. Carefully place the main platter onto the sub-platter.

Rotating the Platter

1. Using your hands, slowly rotate

the platter ten times in a clockwise

direction (Figure 1).

2. This step is for resetting the auto

mechanism, getting rid of any twists in

the belt and making sure the belt rides

smoothly along the drive rim on the

underside of the platter.

3. Place the slip mat on top of the platter.

Make sure the 1byone logo on the mat

is facing up (Figure 2).

Figure 1

Figure 2