ClearSounds CSC600ER Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Телефон ClearSounds CSC600ER. ClearSounds CSC600ER 17 страниц. Clearsounds telephone user manual
Также для ClearSounds CSC600ER: Характеристики (1 страниц)

Печатать страницу

10. Delete a single or all record number(s)

Find out the number which you want to remove, press

the LCD will show

DEL ?

and then press

remove this number. If you press and hold

seconds, the LCD will show

ALL DEL ?

remove all numbers and the LCD will show

In the state of on-hook,

* Press the

button to select the Caller ID numbers.

* Press the

DIAL

button then press the

last dialled numbers.

11. Earphone using

Using the AUDIO NECKLOOP socket -

the socket, then earphone will be activated. In the state, the phone

still works meanwhile you can hear the caller through the earphone.

Using the

socket-

During a call, to activate the earphone, press

the

button then replace the handset in the cradle or press the

SPEAKER

button. In the state, you can hear the caller, also you can

answer the caller through the earphone. To switch back, just press

the

button or pick up the handset or press the

NOTE:

You must insert the adapter for the earphone using.

12.

Speech volume control

You can adjust the sending volume by using the Speech volume

control located on the right side of your phone. If your voice is faint or

weak, adjust the volume to "HI . You can also decrease the volume as

well. There are 3 levels available LO ( ), NORMAL ( ) and HI ( ) .

NOTE:

If you adjust the sending volume to "HI" when an adapter is

connected, the receiver volume will decrease 12 dB compared to the

receiver volume you acquire by adjusting the control to "LO" position.

DELETE

button,

DELETE

button again to

DELETE

button for about 6

then press the

DELETE

button to

NO CALL

button to select the

Plug the earphone into

SPEAKER

button.

SET SOS

Accessing the SOS function, you can ask for help by one-touch

operation when you are in emergency or pay attention to everything

happens at home by remote control whenever.

NOTE:

You need to connect the adapter for the SOS function.

A. To ask for help by one-touch operation

To use the function of asking for help by one-touch operation, you

need to preset the SOS number and you'd better record the message

you want to tell the helper.

1. To register the remote control

The remote control unit is already registered to the base. When you

cannot use the remote control to dial SOS numbers, do the following

operations.

Press the Remote register button located on the bottom of the base,

then press the

SOS

button on the remote control unit.

2. To preset the SOS number

When the LCD shows the

SET SOS

confirm. Then select the

SOS NUMBER

button to enter. There are 6 SOS number available for setting.

a. Press the

button to select one location and enter the

telephone number by keypad (18 digits maximum for each memory).

You can press the

DELETE

button to delete the previous digit.

b. After setting the numbers, press the

return to the previous menu.

3. To set the SOS message

When the LCD shows the

SET SOS

confirm. Then select the

SOS SOUND

button to enter.

a. To record the SOS message

Press the

button to select

the

DIAL

button to confirm. You can record a message in 10 seconds.

menu, press the

DIAL

button to

menu and press the

DIAL

button to store it and

menu, press the

DIAL

button to

menu and press the

DIAL

RECORD SOUND

menu and press