ClearSounds Quattro 4.0 Краткое руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Усилитель ClearSounds Quattro 4.0. ClearSounds Quattro 4.0 4 страницы. Neckloop with removable bluetooth mic (bt4)
Также для ClearSounds Quattro 4.0: Краткое руководство по эксплуатации (4 страниц)

Печатать страницу
4.
PLACE A CALL USING CALLER ID
HOLD
STEP 1: To call using
the Caller ID list
on the QUATTRO 4
(Caller ID service
required): Press and
hold multi-function
button until you hear
a tone.
5.
PAIRING AND CONNECTING THE QUATTRO 4 MICROPHONE
The BT4 mic comes paired out of the factory. However if for some reason it was removed from the
paired list, these are the instructions to "re-pair" it.
PAIR
STEP 1: Remove the
top of the QUATTRO 4
(BT4 Removable Mic).
Æ
STEP 3: Quickly pair
and connect the BT4
Removable Mic: On the
Mic, press and hold
BUTTON until light
flashes red and blue.
STEP 2: Caller
STEP 3: Highlight the
ID list appears
number that you want
on screen. List
to call by tapping
includes calls
received or missed
while the phone
was connected to
the QUATTRO 4.
STEP 2: Ensure QUATTRO
4 is turned off, press and
hold multi-function
button for approximately
six seconds, until Pairing...
appears on screen.
STEP 4: The QUATTRO
4 announces Paired,
and then Device
(number) connected.
CS BT4 Mic appears
on screen.
STEP 4: Press
<
multi-function.
Dialing appears
.
on the screen.
CONNECT & USE
Æ
STEP 1: Place BT4 Removable
Mic in a position that best cap-
tures the voice(s) that you want
to hear. On the BT4 Removable
Mic, BRIEFLY press BUTTON
on the Mic and the device will
begin connecting to the
QUATTRO 4.
HOLD
STEP 3: To terminate
connection, press and
hold multi-function.
The QUATTRO 4
announces call
terminated.
STEP 5: Adjust the
volume: Tap
(volume -) or
(volume +).
x2
STEP 2: To complete
connection: Firmly
press multi-function
button twice.
TIPS: The QUATTRO 4
(and/or mic) turns itself
off in ten minutes when
left completely idle.
-and-
The BT4 Removable Mic
must be within 30 feet
of the QUATTRO 4 to
operate correctly.

QUICK START GUIDE

<
>