ABCD PARADOX SPECTRA SP Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Монитор ABCD PARADOX SPECTRA SP. ABCD PARADOX SPECTRA SP 2 страницы.

Enter 2 digits for the month (01-12)
Enter 2 digits for the day (01-31)
Press CLEAR
Setting Chime Zones
Press and hold the key representing the zone (1 for zone 1 etc.) until the keypad
beeps.
To turn the chime off, repeat the above procedure.
Trouble Display
If the TBL light is on and the Keypad beeps every 5 seconds press the TBL key to stop
the beeping. The keypad will then illuminate a number corresponding to the associated
trouble.
1. Call for Service.
2. Power Trouble. Press 2 to find out what type.
1) Main Battery Low.
2) AC failure on main panel.
3) Auxiliary power failure from the control panel.
3. Siren Problem.
4. Telephone Communication Problem.
5. Zone wiring problem.
6. Module has been tampered with.
7. Call for Service
8. Clock has lost the correct time. Reset the time
9. Call for Service
10. Module Failure. A device is no longer communicating with the control panel.
Arming and Disarming
To arm
the system close
all
zones. Press ARM and enter User Code.
If you have access to both partitions press the desired partition(s).
Sometimes a zone may have to be ignored when the system is being armed. This
could be for any reason but a zone can be bypassed.
To bypass a zone, press BYP and enter User Code. The BYP light will flash. Press the
zone(s) which you wish to bypass until they start to flash. Press ENTER.
30 Stuart St.
Corner Brook, NL
Phone: 1-709-639-8860
Fax: 1-709-634-3123
A2H 6R7
To Disarm
the system press OFF and enter your User Code.
FIRE ALARM
Resetting a Fire Alarm.
If a fire alarm was set off accidentally press the CLEAR within 30 seconds. You will
now have 90 seconds in which to correct the problem. If the problem is not corrected
in 90 seconds the alarm will sound again. Press CLEAR to extend for another 90
seconds.
30 Stuart St.
Corner Brook, NL
Phone: 1-709-639-8860
Fax: 1-709-634-3123
A2H 6R7