Dixon A540CSB0251 Инструкции по обслуживанию и эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Инструкции по обслуживанию и эксплуатации для Промышленное оборудование Dixon A540CSB0251. Dixon A540CSB0251 10 страниц. Industrial fluid controls ground clamp
Печатать страницу
Installation
INSTALLATION MUST BE COMPLETED BY QUALIFIED PROFESSIONAL
A540 Series ground clamps are suitable for installation and use in ordinary and specific hazardous
locations (listed in technical specifications section) as defined by NEC NFPA70 and IECEx standard 60079.
Installation to be performed by a qualified professional.
Mechanical
It is recommended to wall mount the unit using stainless steel or galvanized steel hardware suitable for
the monitor's weight and wall material.
1. Using the bolt pattern provided below, locate a sturdy area, large enough to install the junction
box.
For greatest environmental resistance it is recommended to mount the junction box in the
orientation shown. Keep in mind the coiled cable will hang below the box, and the clamp must
be stored in an ungrounded position. The enclosure can withstand rain and sun exposure but
will last longer when protected from the elements.
2. Level the bolt pattern and drill two holes marked on the pattern.
3. Have another person lift the junction box into position in front of the drilled holes.
4. Insert the two anchors or bolts into the two mounting holes shown below.
5. Tighten all the screws and ensure that the junction box is secure.
REV A 2020/12/11
30710PA
877.582.3569
6