ClearSpan PB00566R4 Руководство по эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Палатка ClearSpan PB00566R4. ClearSpan PB00566R4 18 страниц. Freestanding “hut” style model 14' wide x 14' high x 36' long
Печатать страницуStep 5: One at a time, slide purlins through the rest of the clamps and tighten the bolts with the
ends of the purlins a half inch past the edges of the clamps on the end rafter.
Step 6: After you have installed the first two rafters, slide a 1.315" band clamp onto each of the two
bottom purlins (before you go on to attach the third rafter).
Step 7: Using 1-1/2" carriage bolts and nuts, attach struts between the band clamps on the purlins
and the band clamps on the end rafter. Position the struts so that they form a triangle at rough-
ly a 45° angle when installed. Make sure the end rafter is plumb before you tighten the nuts.
Tip: If you forgot to slide a band clamp into position on a rafter or purlin, you can wedge the
band clamp onto the pipe by striking it with a mallet. Be careful, and wear eye protection!
You can then reclose the end of the band clamp by pinching it with slip joint pliers if necessary.
Page 11