ClearStream 600DAC3 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Промышленное оборудование ClearStream 600DAC3. ClearStream 600DAC3 12 страниц.

The Clearstream System is one of the finest aerobic wastewater systems available today.

Our system converts the sewage from your residence or business into a clear, odorless liquid. This

high degree of treatment is accomplished at a remarkable low operating cost per month. The

system has been simplified over the years to make it as inexpensive to operate and as low in

long term maintenance as possible. Homeowners who have lived with the nuisance of a septic odor

lingering in their neighborhood will truly appreciate the pleasure of owning a Clearstream System.

Clearstream Model DA Systems comply with NSF Standards 40 for Class I residential wastewater

treatment systems, 245 for total nitrogen reduction and 350 for onsite residential and commercial

water reuse treatment.

There are four basic zones or compartments to this treatment unit. Wastewater enters the

aeration chamber of the process tank, where it is mixed with organisms formed during decomposition

of organic material in the wastewater, mixing in the chamber is achieved by release of compressed air

near the bottom of the chamber through fine bubble diffusion.

A conical shaped clarifier is located internal to the process tank to provide for separation of the

solids from the mixed liquor. The mixed liquor passes into the bottom of the clarifier by hydraulic

displacement as wastewater enters the aeration chamber. Solids settled from the wastewater are drawn

back into the aeration chamber from the bottom of the cone by the hydraulic roll created by the air

released in the aeration chamber and are dispersed by the mixing induced by the aerator. An airlift

assembly controlled by a timer and solenoid switch borrow air from the aerator to divert a

small return of water from the clarifier back to the pretreatment tank. Approximately 7 hours of return is

needed for treatment system max flow to provide de-nitrification.

effluent occurs through a submerged tee assembly located below the clarifier surface to prevent

discharge of solids that may float on the surface of the clarifier.

When disinfection is required before final discharge, appropriate disinfection options are

available. If used in Std. 350 operation the Clearstream Model CSUV1 unit must be installed on

discharge.

When properly loaded and maintained, the aforementioned process allows the Clearstream

Wastewater Treatment System to provide years of satisfactory service for the consumer. Clearstream

Model DA systems meet the performance requirements of NSF Standards 40, 245 and 350.

Actual GCT test results used to determine Clearstream's certifications met Standard 2 4 5

averaged <10 mg/l BOD, <10 mg/l TSS and >50% total nitrogen reduction.

INTRODUCTION

PROCESS DESCRIPTION

Discharge of the final clarified

2 of 12