ClearView HD4-D200 Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности ClearView HD4-D200. ClearView HD4-D200 19 страниц. Hdavs



Model B or C: Hold decoration ring tightly and rotate away the pedestal counterclockwise.

Step 2

Take out the installation position map from the accessories bag, paste it on the ceiling or wall

and dig holes on the installation surface according to the installation position map.

Step 3

Use tools to fix the expansion bolts into the installation holes.

Step 4

Adjust the pedestal location (pull the cable through side cable slot if it is side cable outlet).

Align the bolt fixing hole of device pedestal with the expansion bolt fixing holes of the

installation surface; insert the self-tapping screws into the expansion bolts and secure them

firmly to fix the pedestal on the installation surface (if it is top outlet, pull the cable through the

outlet hole on the installation surface after the pedestal is fixed firmly)

Step 5

Install dome body, enclosure (or compression cover) and the decoration ring according to

different models:



Model A: Close the buckle, rotate the enclosure and dome body to proper monitoring

location, and finally rotate the decoration ring tightly.



Model B: Rotate the decoration ring and fix it preliminarily, then rotate the compression

cover and dome body to proper monitoring location, finally rotate the decoration ring tightly.



Model C: Rotate the decoration ring and fix it preliminarily, then rotate the compression

cover and dome body to proper monitoring location; connect the video output port of the

device cable to the back-end coding device, and connect power port to the power; it is to

adjust lens focal length to make image clear via focusing tool after image is displayed on

the back-end coding device; finally rotate the decoration ring tightly.

So far, you have completed device installation and cable connection, you can check monitoring

picture via back-end coding device.

Please refer to the following installation steps if it is model D or E.