DIY Retractable Awnings SunCover 4000 Мануалы по установке - Страница 3
Просмотреть онлайн или скачать pdf Мануалы по установке для Аксессуары DIY Retractable Awnings SunCover 4000. DIY Retractable Awnings SunCover 4000 11 страниц.
Печатать страницуBEFORE YOU BEGIN – Please read completely
Thank you for your purchase. By carefully reading these instructions you will reduce your installation time while providing a
safe, worry-free addition to your home. Contained within these instructions are the basic installation guidelines for a typical
mounting surface. The installation of this product typically takes two people with basic carpentry skills about two hours to in-
stall. A third person, to help carry the unit up the ladder and place into the installation brackets, will add to the safety of the
installation and is highly recommended. Incorrect installation and operation of your shading system may result in product fail-
ure and possible injury, which is not covered by this warranty. Please carefully read this entire document BEFORE attempting
your installation. Improper installation can cause damage to the product, your home and compromise the safety of those
under or near the awning.
If you are experiencing problems with your installation or have questions about
WHAT YOU NEED BEFORE YOU BEGIN
Although 4" lag screws and washers have been provided with this unit, which is adequate for most installations,
you MAY STILL NEED to purchase a different length based on your unique application. The correct lag screw
length is determined by your mounting surface and mounting method – see
DETERMINING PROPER LAG SCREW LENGTH for more details
You may also need caulk to ensure a weatherproof seal around your installation brackets,
a paintable or color matching caulk should be used – two tubes is typically sufficient.
INSTALLATION TOOL LIST
Tape measure
Level
Hammer and wood block or rubber mallet
Utility knife
1/8" drill bit for pilot holes
Appropriate lag bolts for installation – 4" long lags provided
NOTE: These lags MAY NOT be the correct length for your application - check the guide
Caulking gun and appropriate caulk for the job
AWNING ADJUSTMENT TOOL LIST
Allen Wrenches: 3mm, 4mm, 5mm.
If the unit has an optional hood - include 6mm, 10mm.
Open/Box Wrenches:13mm.
If the unit has an optional hood - 17mm, 22mm.
RETRACTABLE AWNING
INSTALLATION GUIDELINES
SunCover 4000/5000 Models
proper operation, please email us at:
.
Stud finder
Chalk line or laser level
Suitable ladder(s)
Electric drill
Phillips #2 screw driver
Eye protection
Sockets and ratchet set
A helper
2